cml/picadae
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Clear TCNTx registers at start of attack and hold.

Browse Source 
Reverse polarity of hold output.
This commit is contained in:
kevin.larke 2019-09-14 10:43:05 -04:00
parent 766dc5d6a6
commit 3fbe3ad019
1 changed files with 13 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
control/tiny/i2c_timer_pwm.c
View File

@ -221,6 +221,7 @@ void tmr0_reset()
OCR0A = ctl_regs[kTmr_Fine_idx]; OCR0A = ctl_regs[kTmr_Fine_idx];
} }
TCNT0 = 0;
TIMSK |= _BV(OCIE0A); // enable the timer interrupt TIMSK |= _BV(OCIE0A); // enable the timer interrupt
} }
@ -248,6 +249,7 @@ ISR(TIMER0_COMPA_vect)
clear_attack(); clear_attack();
TCNT1 = 0;
TIMSK |= _BV(OCIE1B) + _BV(TOIE1); // PWM interupt Enable interrupts TIMSK |= _BV(OCIE1B) + _BV(TOIE1); // PWM interupt Enable interrupts
TIMSK &= ~_BV(OCIE0A); // clear timer interrupt TIMSK &= ~_BV(OCIE0A); // clear timer interrupt
@ -282,15 +284,17 @@ void pwm1_update()
} }
// Called when TCNT1 == OCR1C.
// At this point TCNT1 is reset to 0, new OCR1B values are latched from temp. loctaion to OCR1B
ISR(TIMER1_OVF_vect) ISR(TIMER1_OVF_vect)
{ {
PORTB |= _BV(HOLD_PIN); // set PWM pin PORTB &= ~(_BV(HOLD_PIN)); // clear PWM pin
} }
// Called when TCN1 == OCR1B
ISR(TIMER1_COMPB_vect) ISR(TIMER1_COMPB_vect)
{ {
PORTB &= ~(_BV(HOLD_PIN)); // clear PWM pin PORTB |= _BV(HOLD_PIN); // set PWM pin
} }
@ -300,9 +304,6 @@ void pwm1_init()
DDRB |= _BV(HOLD_DIR); // setup PB3 as output DDRB |= _BV(HOLD_DIR); // setup PB3 as output
// set on TCNT1 == 0 // happens when TCNT1 matches OCR1C
// clr on OCR1B == TCNT // happens when TCNT1 matches OCR1B
// // COM1B1=1 COM1B0=0 (enable output on ~OC1B)
TCCR1 |= ctl_regs[ kPwm_Div_idx]; // 32us period (512 divider) prescaler TCCR1 |= ctl_regs[ kPwm_Div_idx]; // 32us period (512 divider) prescaler
GTCCR |= _BV(PWM1B); // Enable PWM B and disconnect output pins GTCCR |= _BV(PWM1B); // Enable PWM B and disconnect output pins
GTCCR |= _BV(PSR1); // Set the pre-scaler to the selected value GTCCR |= _BV(PSR1); // Set the pre-scaler to the selected value
@ -452,7 +453,9 @@ void on_receive( uint8_t byteN )
// if the PWM prescaler was changed // if the PWM prescaler was changed
if( i == 3 ) if( i == 3 )
cli();
pwm1_init(); pwm1_init();
sei();
pwm1_update(); pwm1_update();
break; break;
@ -470,7 +473,9 @@ void on_receive( uint8_t byteN )
} }
// if a prescaler was included then the timer needs to be re-initialized // if a prescaler was included then the timer needs to be re-initialized
if( i == 3 ) if( i == 3 )
cli();
tmr0_init(); tmr0_init();
sei();
tmr0_reset(); tmr0_reset();
break; break;