libcm is a C development framework with an emphasis on audio signal processing applications.
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

cmGnuPlot.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102
  1. #ifndef cmGnuPlot_h
  2. #define cmGnuPlot_h
  3. enum
  4. {
  5. kOkPlRC,
  6. kSignalFailedPlRC,
  7. kPipeFailedPlRC,
  8. kForkFailedPlRC,
  9. kExecFailedPlRC,
  10. kPipeCloseFailedPlRC,
  11. kPlotNotFoundPlRC,
  12. kNoCurPlotPlRC,
  13. kPlotDataFileFailPlRC,
  14. kFopenFailedPlRC,
  15. kFcloseFailedPlRC
  16. };
  17. enum
  18. {
  19. kInvalidPlotPtId = 0x000,
  20. kPlusPlotPtId = 0x001,
  21. kXPlotPtId = 0x002,
  22. kAsteriskPlotPtId = 0x003,
  23. kSquarePlotPtId = 0x004,
  24. kFillSquarePlotPtId = 0x005,
  25. kCirclePlotPtId = 0x006,
  26. kFillCirclePlotPtId = 0x007,
  27. kTriPlotPtId = 0x008,
  28. kFillTriPlotPtId = 0x009,
  29. kInvTriPlotPtId = 0x00a,
  30. kInvFillTriPlotPtId = 0x00b,
  31. kDiamondPlotPtId = 0x00c,
  32. kFillDiamonPlotPtId = 0x00d,
  33. kPlotPtMask = 0x00f,
  34. };
  35. enum
  36. {
  37. kInvalidPlotLineId = 0x000, // -2 after translation
  38. kSolidPlotLineId = 0x010, // -1 after translation
  39. kDashPlotLineId = 0x020, // 0 after translation
  40. kPlotLineMask = 0x0f0,
  41. kPlotLineShift = 4
  42. };
  43. enum
  44. {
  45. kImpulsePlotFl = 0x100
  46. };
  47. /// Set terminal to NULL to use the default terminal.
  48. cmRC_t cmPlotInitialize( const char* terminalStr );
  49. // Combines initializaion and setup in a single call.
  50. cmRC_t cmPlotInitialize2( const char* terminalStr, const char* title, unsigned rowCnt, unsigned colCnt );
  51. cmRC_t cmPlotFinalize();
  52. /// Setup the plot page
  53. cmRC_t cmPlotSetup( const char* title, unsigned rowCnt, unsigned colCnt );
  54. /// Select sub-plot to apply subsequent commands to
  55. cmRC_t cmPlotSelectSubPlot( unsigned ri, unsigned ci );
  56. /// Clear the current current subplot
  57. cmRC_t cmPlotClear();
  58. /// Set the labels on the current sub-plot
  59. cmRC_t cmPlotSetLabels( const char* title, const char* xLabelStr, const char* yLabelStr, const char* zLabelStr );
  60. /// Set the default ranges for the x, y and z axes. To leave the ranges at their current values set the min and max to -1.
  61. /// The range values are used to form data sets when data is not explicitely given.
  62. cmRC_t cmPlotSetRange( double xMin, double xMax, double yMin, double yMax, double zMin, double zMax );
  63. /// If x or y is given as NULL then the values will be taken from the range settings xMin:xMax or yMin:yMax.
  64. /// Use the gnuplot command:'test' to see the valid lineType and pointType values for a given terminal
  65. /// Color string may be any of the predefined color labels: show palette colornames or and rgb value: e.g. #FF00FF
  66. cmRC_t cmPlotLineF( const char* legendStr, const float* x, const float* y, const float* z, unsigned n, const char* colorStr, unsigned styleFlags );
  67. cmRC_t cmPlotLineD( const char* legendStr, const double* x, const double* y, const double* z, unsigned n, const char* colorStr, unsigned styleFlags );
  68. cmRC_t cmPlotLineMD( const double* x, const double* y, const double* z, unsigned rn, unsigned cn, unsigned styleFlags );
  69. #if CM_FLOAT_SMP == 1
  70. #define cmPlotLineS cmPlotLineF
  71. #else
  72. #define cmPlotLineS cmPlotLineD
  73. #endif
  74. #if CM_FLOAT_REAL == 1
  75. #define cmPlotLineR cmPlotLineF
  76. #else
  77. #define cmPlotLineR cmPlotLineD
  78. #endif
  79. cmRC_t cmPlotDraw();
  80. cmRC_t cmPlotPrint( bool printDataFl );
  81. cmRC_t cmPlotDrawAndPrint( bool printDataFl );
  82. #endif