//( {file_desc: "Thread safe audio buffer class." kw:[rt audio]}
//
// This file defines an audio buffer class which handles
// buffering incoming (recording) and outgoing (playback)
// samples in a thread-safe manner. 
//
// Usage example and testing code:
// See cmApBufTest() and cmAudioSysTest().
// \snippet cmApBuf.c cmApBufExample
//
// Notes on channel flags:
// Disabled channels:  kChFl is cleared
//   cmApBufGet()     
//      in  - return NULL buffer pointers  
//      out - return NULL buffer points
//
//   cmApBufUpdate()
//      in  - incoming samples are set to 0. 
//      out - outgoing samples are set to 0.
//
// Muted channels: kMuteFl is set 
//   cmApBufUpdate()
//      in  - incoming samples are set to 0. 
//      out - outgoing samples are set to 0.
//
// Tone channels: kToneFl is set 
//   cmApBufUpdate()
//      in  - incoming samples are filled with a 1k sine tone
//      out - outgoing samples are filled with a 1k sine tone
//)

#ifndef cmApBuf_h
#define cmApBuf_h

#ifdef __cplusplus
extern "C" {
#endif
  
  //(
  typedef cmRC_t cmAbRC_t;  //< Result code type
  
  enum
  {
    kOkAbRC = 0
  };

  // Allocate and initialize an audio buffer.
  // devCnt - count of devices this buffer will handle.
  // meterMs - length of the meter buffers in milliseconds (automatically limit to the range:10 to 1000)
  cmAbRC_t cmApBufInitialize( unsigned devCnt, unsigned meterMs );

  // Deallocate and release any resource held by an audio buffer allocated via cmApBufInitialize().
  cmAbRC_t cmApBufFinalize();

  // Configure a buffer for a given device.  
  cmAbRC_t cmApBufSetup( 
    unsigned devIdx,              //< device to setup
    double   srate,               //< device sample rate (only required for synthesizing the correct test-tone frequency)
    unsigned dspFrameCnt,         //< dspFrameCnt - count of samples in channel buffers returned via cmApBufGet() 
    unsigned cycleCnt,            //< number of audio port cycles to store 
    unsigned inChCnt,             //< input channel count on this device
    unsigned inFramesPerCycle,    //< maximum number of incoming sample frames on an audio port cycle
    unsigned outChCnt,            //< output channel count on this device
    unsigned outFramesPerCycle,   //< maximum number of outgoing sample frames in an audio port cycle
    int      srateMult );         //< sample rate cvt (positive for upsample, negative for downsample)

  // Prime the buffer with 'audioCycleCnt' * outFramesPerCycle samples ready to be played
  cmAbRC_t cmApBufPrimeOutput( unsigned devIdx, unsigned audioCycleCnt );

  // Notify the audio buffer that a device is being enabled or disabled.
  void     cmApBufOnPortEnable( unsigned devIdx, bool enabelFl );

  // This function is called asynchronously by the audio device driver to transfer incoming samples to the
  // the buffer and to send outgoing samples to the DAC. This function is 
  // intended to be called from the audio port callback function (\see cmApCallbackPtr_t).
  // This function is thread-safe under the condition where the audio device uses
  // different threads for input and output.
  //
  // Enable Flag: 
  // Input: If an input channel is disabled then the incoming samples are replaced with zeros.
  // Output: If an output channel is disabled then the packet samples are set to zeros.
  //
  // Tone Flag:
  // Input: If the tone flag is set on an input channel then the incoming samples are set to a sine tone.
  // Output: If the tone flag is set on an output channel then the packet samples are set to a sine tone.
  //
  // The enable flag has higher precedence than the tone flag therefore disabled channels
  // will be set to zero even if the tone flag is set.
  cmAbRC_t cmApBufUpdate(
    cmApAudioPacket_t* inPktArray,  //< full audio packets from incoming audio (from ADC)
    unsigned           inPktCnt,    //< count of incoming audio packets
    cmApAudioPacket_t* outPktArray, //< empty audio packet for outgoing audio (to DAC)  
    unsigned           outPktCnt    //< count of outgoing audio packets
                         );
  // Channel flags
  enum
  {
    kInApFl     = 0x01,  //< Identify an input channel
    kOutApFl    = 0x02,  //< Identify an output channel
    kEnableApFl = 0x04,  //< Set to enable a channel, Clear to disable. 

    kChApFl     = 0x08,  //< Used to enable/disable a channel
    kMuteApFl   = 0x10,  //< Mute this channel
    kToneApFl   = 0x20,  //< Generate a tone on this channel
    kMeterApFl  = 0x40,  //< Turn meter's on/off
    kPassApFl   = 0x80   //< Pass input channels throught to the output. Must use cmApBufGetIO() to implement this functionality.
  
  };

  // Return the meter window period as set by cmApBufInitialize()
  unsigned cmApBufMeterMs();
  
  // Set the meter update period. THis function limits the value to between 10 and 1000.
  void     cmApBufSetMeterMs( unsigned meterMs );

  // Returns the channel count set via cmApBufSetup().
  unsigned cmApBufChannelCount( unsigned devIdx, unsigned flags );

  // Set chIdx to -1 to enable all channels on this device.
  // Set flags to {kInApFl | kOutApFl} | {kChApFl | kToneApFl | kMeterFl} | { kEnableApFl=on | 0=off }  
  void cmApBufSetFlag( unsigned devIdx, unsigned chIdx, unsigned flags );
  
  // Return true if the the flags is set.
  bool cmApBufIsFlag( unsigned devIdx, unsigned chIdx, unsigned flags );

  // Set chIdx to -1 to enable all channels on this device.
  void  cmApBufEnableChannel(   unsigned devIdx, unsigned chIdx, unsigned flags );

  // Returns true if an input/output channel is enabled on the specified device.
  bool  cmApBufIsChannelEnabled(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Set the state of the tone generator on the specified channel.
  // Set chIdx to -1 to apply the change to all channels on this device.
  // Set flags to {kInApFl | kOutApFl} | { kEnableApFl=on | 0=off }
  void  cmApBufEnableTone(   unsigned devIdx, unsigned chIdx, unsigned flags );

  // Returns true if an input/output tone is enabled on the specified device.
  bool  cmApBufIsToneEnabled(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Mute a specified channel.
  // Set chIdx to -1 to apply the change to all channels on this device.
  // Set flags to {kInApFl | kOutApFl} | { kEnableApFl=on | 0=off }
  void  cmApBufEnableMute(   unsigned devIdx, unsigned chIdx, unsigned flags );

  // Returns true if an input/output channel is muted on the specified device.
  bool  cmApBufIsMuteEnabled(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Set the specified channel to pass through.
  // Set chIdx to -1 to apply the change to all channels on this device.
  // Set flags to {kInApFl | kOutApFl} | { kEnableApFl=on | 0=off }
  void  cmApBufEnablePass(   unsigned devIdx, unsigned chIdx, unsigned flags );

  // Returns true if pass through is enabled on the specified channel.
  bool  cmApBufIsPassEnabled(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Turn meter data collection on and off.
  // Set chIdx to -1 to apply the change to all channels on this device.
  // Set flags to {kInApFl | kOutApFl} | { kEnableApFl=on | 0=off }
  void  cmApBufEnableMeter(   unsigned devIdx, unsigned chIdx, unsigned flags );

  // Returns true if an input/output tone is enabled on the specified device.
  bool  cmApBufIsMeterEnabled(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Return the meter value for the requested channel.
  // Set flags to kInApFl | kOutApFl.
  cmApSample_t cmApBufMeter(unsigned devIdx, unsigned chIdx, unsigned flags );

  // Set chIdx to -1 to apply the gain to all channels on the specified device.
  void cmApBufSetGain( unsigned devIdx, unsigned chIdx, unsigned flags, double gain );

  // Return the current gain seting for the specified channel.
  double cmApBufGain( unsigned devIdx, unsigned chIdx, unsigned flags ); 

  // Get the meter and fault status of the channel input or output channel array of a device.
  // Set 'flags' to { kInApFl | kOutApFl }.
  // The returns value is the count of channels actually written to meterArray.
  // If 'faultCntPtr' is non-NULL then it is set to the faultCnt of the associated devices input or output buffer.
  unsigned cmApBufGetStatus( unsigned devIdx, unsigned flags, double* meterArray, unsigned meterCnt, unsigned* faultCntPtr );

  // Do all enabled input/output channels on this device have samples available?
  // 'flags' can be set to either or both kInApFl and kOutApFl
  bool  cmApBufIsDeviceReady( unsigned devIdx, unsigned flags ); 

  // This function is called by the application to get full incoming sample buffers and
  // to fill empty outgoing sample buffers.
  // Upon return each element in bufArray[bufChCnt] holds a pointer to a buffer assoicated 
  // with an audio channel or to NULL if the channel is disabled.
  // 'flags' can be set to kInApFl or kOutApFl but not both.
  // The buffers pointed to by bufArray[] each contain 'dspFrameCnt' samples. Where 
  // 'dspFrameCnt' was set in the earlier call to cmApBufSetup() for this device.
  // (see cmApBufInitialize()).
  // Note that this function just returns audio information it does not
  // change any cmApBuf() internal states.
  void cmApBufGet(     unsigned devIdx, unsigned flags, cmApSample_t* bufArray[], unsigned bufChCnt );

  // This function replaces calls to cmApBufGet() and implements pass-through and output 
  // buffer zeroing: 
  // 
  // 1) cmApBufGet(in);
  // 2) cmApBufGet(out);
  // 3) Copy through channels marked for 'pass' and set the associated oBufArray[i] channel to NULL.
  // 4) Zero all other enabled output channels.
  //
  // Notes:
  // 1) The oBufArray[] channels that are disabled or marked for pass-through will 
  // be set to NULL.
  // 2) The client is required to use this function to implement pass-through internally.
  // 3) This function just returns audio information it does not
  // change any cmApBuf() internal states.
  // 4) The timestamp pointers are optional.
  void cmApBufGetIO(   unsigned iDevIdx, cmApSample_t* iBufArray[], unsigned iBufChCnt, cmTimeSpec_t* iTimeStampPtr, 
                       unsigned oDevIdx, cmApSample_t* oBufArray[], unsigned oBufChCnt, cmTimeSpec_t* oTimeStampPtr );


  // The application calls this function each time it completes processing of a bufArray[]
  // returned from cmApBufGet(). 'flags' can be set to either or both kInApFl and kOutApFl.
  // This function should only be called from the client thread.
  void cmApBufAdvance( unsigned devIdx, unsigned flags );

    // Copy all available samples incoming samples from an input device to an output device.
  // The source code for this example is a good example of how an application should use cmApBufGet()
  // and cmApBufAdvance().
  void cmApBufInputToOutput( unsigned inDevIdx, unsigned outDevIdx );

  // Print the current buffer state.
  void cmApBufReport( cmRpt_t* rpt );

  // Run a buffer usage simulation to test the class. cmAudioPortTest.c calls this function.
  void cmApBufTest( cmRpt_t* rpt );

  //)


#ifdef __cplusplus
}
#endif

#endif