Changed default input and output gain to 0.0.

score follower input.

Removed dead code _cmDspSys_TlXformChain1().

1) Added two new audio inputs (ai2p,ai3p) and mixers (mx0p,mx1p)
to allow contact mic's to be mixed with air mic's.
2) Added two new audio outputs (a02p,a03p) which are duplicates of
   ao0p and ao1p.
3) Added all pass filters to all four audio outputs to decorrelate output.
4) Added Bypass button to bypass the all pass filters.

variables. Attempted to add a score location number box - but it is not yet working
correctly.

cmRecdPlay objects now take a resource based list of segments to pre-load.

from the score UI.

Added connection from 'Dump' button to score to print score location report.

app/cmOnset.c
app/cmPickup.c
app/cmScore.c
app/cmScoreProc.c
app/cmTimeLine.c
cmAudDsp.c
cmAudioAggDev.c
cmAudioFileDev.c
cmAudioNrtDev.c
cmAudioPort.c
cmAudioPortFile.c
cmDevCfg.c
cmFeatFile.c
cmMidi.c
cmMidiFile.c
cmProc2.c
cmProc3.c
cmProc4.c
cmProcTest.c
cmRbm.c
cmUiRtSysMstr.c
dsp/cmDspClass.c
dsp/cmDspFx.c
dsp/cmDspNet.c
dsp/cmDspPgmKr.c
dsp/cmDspPgmPP.c
dsp/cmDspPgmPPMain.c
dsp/cmDspSys.c
dsp/cmDspUi.c

The original function is in _cmDspSysPgm_TimeLine2().

audio input between the recorded and audio input port.

to the 'availCh' 'reset' rather than 'trig'.  'AvailCh' 'reset' output
is connected to the 'Xfader' 'reset' input. The score location print out
now comes from the 'recent' score follower output.

off button (it's not clear that all-notes-off actually works.).

and added siRt to route midi file player smpidx output in
'simulate' mode.

_cmDspSysPgm_TimeLine() to have 'live' and 'simulate' modes.

port does not require a device or port selector.

of measurements.

crossfading transforms.

right and left transforms.

add command is sent from the 'typeId' field of the performance eval. MsgList.

because it is now used as the 'bump' mode coefficient more often than it's original
intent as a threshold offset in the spec. dist. envelope following modes.

The phasor value must be limited to a max value - the size of the wave table
otherwise the resolution of the phasor object phase counter eventually
diminishes due to the increasing value of the integer part of the
floating point value.  This will result in distortion in the wave table
output because the phase value will not increment reliably.