Merge branch 'master' of wf:webapps/gitweb/repos/libcm

Makefile.am

@@ -33,6 +33,9 @@ cmSRC += src/libcm/cmAudioPort.c src/libcm/cmApBuf.c src/libcm/cmAudioAggDev.c s
 cmHDR += src/libcm/cmMidiFilePlay.h src/libcm/cmMidiPort.h src/libcm/cmMidiFile.h src/libcm/cmMidi.h 
 cmSRC += src/libcm/cmMidiFilePlay.c src/libcm/cmMidiPort.c src/libcm/cmMidiFile.c src/libcm/cmMidi.c 
 
+cmHDR += src/libcm/cmSerialPort.h
+cmSRC += src/libcm/cmSerialPort.c
+
 cmHDR += src/libcm/cmAudioFile.h src/libcm/cmAudioFileMgr.h src/libcm/cmMsgProtocol.h src/libcm/cmAudioSys.h src/libcm/cmAudioPortFile.h src/libcm/cmAudioFileDev.h 
 cmSRC += src/libcm/cmAudioFile.c src/libcm/cmAudioFileMgr.c src/libcm/cmMsgProtocol.c src/libcm/cmAudioSys.c src/libcm/cmAudioPortFile.c src/libcm/cmAudioFileDev.c
 

cmApBuf.c

@@ -815,6 +815,7 @@ void cmApBufInputToOutput( unsigned iDevIdx, unsigned oDevIdx )
 
       unsigned    byteCnt  = ip->dspFrameCnt * sizeof(cmApSample_t);
 
+
       if( oBufPtrArray[i] != NULL )
       {      
         // the input channel is not disabled
@@ -846,17 +847,19 @@ void cmApBufReport( cmRpt_t* rpt )
       unsigned ii = 0;
       unsigned oi = 0;
       unsigned fn  = 0;
+      cmApSample_t mtr = 0;
       for(k=0; k<ip->chCnt; ++k)
       {
         cmApCh* cp = ip->chArray + i;
         ii += cp->ii;
         oi += cp->oi;
         fn += cp->fn;
+        mtr += _cmApMeterValue(cp);
       }
 
-        cmRptPrintf(rpt,"%s - i:%7i o:%7i f:%7i n:%7i err %s:%7i ",
+      cmRptPrintf(rpt,"%s - i:%7i o:%7i f:%7i n:%7i err %s:%7i  mtr:%5.4f ",
         j==0?"IN":"OUT",
-        ii,oi,fn,ip->n, (j==0?"over":"under"), ip->faultCnt);
+        ii,oi,fn,ip->n, (j==0?"over":"under"), ip->faultCnt, mtr);
       
     }
 

cmAudDsp.c

@@ -19,6 +19,7 @@
 #include "cmApBuf.h"
 #include "cmMidi.h"
 #include "cmMidiPort.h"
+#include "cmSerialPort.h"
 #include "dsp/cmDspValue.h"
 #include "cmMsgProtocol.h"
 #include "cmThread.h"
@@ -91,6 +92,12 @@ typedef struct
   unsigned           msgsPerClientPoll;
   const cmChar_t*    dfltProgramLabel;
 
+  char*              serialDeviceStr;
+  unsigned           serialBaud;
+  unsigned           serialCfgFlags;
+  unsigned           serialPollPeriodMs;
+  cmSeH_t            serialPortH;
+
   cmAdAggDev_t*      aggDevArray;
   unsigned           aggDevCnt;
 
@@ -169,6 +176,7 @@ cmAdRC_t _cmAdParseSysJsonTree( cmAd_t* p )
   cmJsonNode_t*   nrtDevArrNodePtr = NULL;
   cmJsonNode_t*   afpDevArrNodePtr = NULL;
   cmJsonNode_t*   audDspNodePtr    = NULL;
+  cmJsonNode_t*   serialNodePtr    = NULL;
   const cmChar_t* errLabelPtr      = NULL;
   unsigned        i;
   cmJsRC_t      jsRC = kOkJsRC;
@@ -190,12 +198,28 @@ cmAdRC_t _cmAdParseSysJsonTree( cmAd_t* p )
         "aggDevArray",        kArrayTId  | kOptArgJsFl, &aggDevArrNodePtr,
         "nrtDevArray",        kArrayTId  | kOptArgJsFl, &nrtDevArrNodePtr,
         "afpDevArray",        kArrayTId  | kOptArgJsFl, &afpDevArrNodePtr,
+        "serial",             kObjectTId | kOptArgJsFl, &serialNodePtr,
         NULL )) != kOkJsRC )
   {
     rc = _cmAdParseMemberErr(p, jsRC, errLabelPtr, "aud_dsp" );
     goto errLabel;
   }
 
+  // parse the serial port cfg
+  if( serialNodePtr != NULL )
+  {
+    if(( jsRC      = cmJsonMemberValues( serialNodePtr, &errLabelPtr, 
+          "device",           kStringTId, &p->serialDeviceStr,
+          "baud",             kIntTId,    &p->serialBaud,
+          "flags",            kIntTId,    &p->serialCfgFlags,
+          "pollPeriodMs",     kIntTId,    &p->serialPollPeriodMs,
+          NULL )) != kOkJsRC )
+    {
+      rc = _cmAdParseMemberErr(p, jsRC, errLabelPtr, "serial" );
+      goto errLabel;
+    }
+  }
+
   // parse the aggregate device specifications into p->aggDevArray[].
   if( aggDevArrNodePtr != NULL && (p->aggDevCnt = cmJsonChildCount(aggDevArrNodePtr)) > 0)
   {
@@ -382,6 +406,22 @@ cmAdRC_t _cmAdSetup( cmAd_t* p )
   return rc;
 }
 
+cmAdRC_t _cmAdCreateSerialPort( cmAd_t* p )
+{
+  cmAdRC_t rc = kOkAdRC;
+  
+  if( p->serialDeviceStr != NULL )
+  {
+    p->serialPortH = cmSeCreate( &p->ctx, &p->serialPortH, p->serialDeviceStr, p->serialBaud, p->serialCfgFlags, NULL, NULL, p->serialPollPeriodMs );
+    
+    if( !cmSeIsOpen(p->serialPortH) )
+    {
+      rc = cmErrMsg(&p->err,kSerialDevCreateFailAdRC,"The serial device '%s' creation failed.",cmStringNullGuard(p->serialDeviceStr));
+    }
+  }
+  return rc;
+}
+
 cmAdRC_t _cmAdCreateAggDevices( cmAd_t* p )
 {
   cmAdRC_t rc = kOkAdRC;
@@ -570,6 +610,15 @@ cmAdRC_t _cmAudDspFree( cmAd_t* p )
     goto errLabel;
   }
 
+  if( cmSeIsOpen(p->serialPortH) )
+  {    
+    if( cmSeDestroy(&p->serialPortH) != kOkSeRC )
+    {
+      rc = cmErrMsg(&p->err,kSerialPortFailAdRC,"Serial port finalize failed.");
+      goto errLabel;      
+    }
+  }
+  
   if( cmMpIsInitialized() )
     if( cmMpFinalize() != kOkMpRC )
     {
@@ -695,6 +744,13 @@ cmAdRC_t cmAudDspAlloc( cmCtx_t* ctx, cmAdH_t* hp, cmMsgSendFuncPtr_t cbFunc, vo
     goto errLabel;
   }
 
+  // create the serial port
+  if( _cmAdCreateSerialPort(p) != kOkAdRC )
+  {
+    rc = cmErrMsg(&p->err,kSerialPortFailAdRC,"The MIDI system initialization failed.");
+    goto errLabel;
+  }
+  
   // initialize the MIDI system
   if( cmMpInitialize(ctx,NULL,NULL,p->midiPortBufByteCnt,"app") != kOkMpRC )
   {
@@ -713,7 +769,7 @@ cmAdRC_t cmAudDspAlloc( cmCtx_t* ctx, cmAdH_t* hp, cmMsgSendFuncPtr_t cbFunc, vo
     goto errLabel;
 
   // initialize the DSP system
-  if( cmDspSysInitialize(ctx,&p->dsH,p->netH) )
+  if( cmDspSysInitialize(ctx,&p->dsH,p->netH,p->serialPortH) )
   {
     rc = cmErrMsg(&p->err,kDspSysFailAdRC,"The DSP system initialization failed.");
     goto errLabel;
@@ -1143,7 +1199,7 @@ cmAdRC_t _cmAudDspLoadAudioSys( cmAd_t* p, unsigned asCfgIdx )
       {
         // ... and allocate additional DSP systems when more than one sub-sys is 
         // defined in the audio system configuration
-        if( cmDspSysInitialize(&p->ctx,&dsH,p->netH) != kOkDspRC )
+        if( cmDspSysInitialize(&p->ctx,&dsH,p->netH,p->serialPortH) != kOkDspRC )
         {
           rc = cmErrMsg(&p->err,kDspSysFailAdRC,"Unable to initialize an additional DSP system.");
           goto errLabel;

cmAudDsp.h

@@ -13,6 +13,7 @@ extern "C" {
     kAudioPortFailAdRC,
     kAudioSysFailAdRC,
     kMidiSysFailAdRC,
+    kSerialPortFailAdRC,
     kDspSysFailAdRC,
     kFileSysFailAdRC,
     kJsonFailAdRC,
@@ -21,6 +22,7 @@ extern "C" {
     kNoPgmLoadedAdRC,
     kInvalidSubSysIdxAdRC,
     kUnknownMsgTypeAdRC,
+    kSerialDevCreateFailAdRC,
     kAggDevSysFailAdRC,
     kAggDevCreateFailAdRC,
     kNrtDevSysFailAdRC,

cmAudioPort.c

@@ -743,6 +743,8 @@ int cmApPortTest( bool runFl, cmRpt_t* rpt, int argc, const char* argv[] )
     if( r.inDevIdx != r.outDevIdx )
       cmApBufSetup( r.inDevIdx, r.srate, r.framesPerCycle, r.bufCnt, cmApDeviceChannelCount(r.inDevIdx,true), r.framesPerCycle, cmApDeviceChannelCount(r.inDevIdx,false), r.framesPerCycle ); 
 
+    cmApBufEnableMeter(  r.inDevIdx, -1, kEnableApFl );
+
     // setup an output device
     if(cmApDeviceSetup(r.outDevIdx,r.srate,r.framesPerCycle,_cmApPortCb2,&r) != kOkApRC )
       cmRptPrintf(rpt,"Out device setup failed.\n");

cmAudioSys.c

@@ -15,6 +15,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmAudioSysMsg.h"
 #include "cmAudioSys.h"
 #include "cmMidi.h"
@@ -37,6 +38,7 @@ typedef struct
   cmTsMp1cH_t        htdQueueH; // host-to-dsp thread safe msg queue
   cmThreadMutexH_t   engMutexH; // thread mutex and condition variable
   cmUdpNetH_t        netH;
+  cmSeH_t            serialPortH; 
   bool               enableFl;  // application controlled pause flag
   bool               runFl;     // false during finalization otherwise true
   bool               statusFl;  // true if regular status notifications should be sent
@@ -507,6 +509,13 @@ void _cmAudioSysMidiCallback( const cmMidiPacket_t* pktArray, unsigned pktCnt )
 
 }
 
+void _cmAudioSysSerialPortCallback( void* cbArg, const void* byteA, unsigned byteN )
+{
+  //_cmAsCfg_t* p (_cmAsCfg_t*)cbArg;
+  
+  // TODO: handle serial receive
+}
+
 cmAsRC_t cmAudioSysAllocate( cmAudioSysH_t* hp, cmRpt_t* rpt, const cmAudioSysCfg_t* cfg )
 {
   cmAsRC_t rc;
@@ -832,6 +841,7 @@ cmAsRC_t cmAudioSysInitialize( cmAudioSysH_t h, const cmAudioSysCfg_t* cfg )
     cp->iMeterArray      = cmMemAllocZ( double, cp->status.iMeterCnt );
     cp->oMeterArray      = cmMemAllocZ( double, cp->status.oMeterCnt );
     cp->netH             = cfg->netH;
+    cp->serialPortH      = cfg->serialPortH;
 
     // create the audio System thread
     if((rc = cmThreadCreate( &cp->threadH, _cmAsThreadCallback, cp, ss->args.rpt )) != kOkThRC )
@@ -874,6 +884,16 @@ cmAsRC_t cmAudioSysInitialize( cmAudioSysH_t h, const cmAudioSysCfg_t* cfg )
         goto errLabel;
       }
 
+    // install the serial port 
+    if( cmSeIsOpen(cp->serialPortH) )
+    {
+      if( cmSeSetCallback(cp->serialPortH, _cmAudioSysSerialPortCallback, cp ) != kOkSeRC )
+      {
+        rc = _cmAsError(p,kSerialPortFailAsRC,"Serial port callback installation failed.");
+        goto errLabel;        
+      }
+    }
+
     // setup the sub-system status notification 
     cp->statusUpdateSmpCnt = floor(cmApBufMeterMs() * cp->ss.args.srate / 1000.0 );
     cp->statusUpdateSmpIdx = 0;
@@ -886,6 +906,16 @@ cmAsRC_t cmAudioSysInitialize( cmAudioSysH_t h, const cmAudioSysCfg_t* cfg )
       rc = _cmAsError(p,kThreadErrAsRC,"Thread start failed.");
       goto errLabel;
     }
+
+    if( cmSeIsOpen(cp->serialPortH) )
+    {
+      if( cmSeStart( cp->serialPortH ) != kOkSeRC )
+      {
+        rc = _cmAsError(p,kSerialPortFailAsRC,"Serial port start failed.");
+        goto errLabel;        
+      }
+      
+    }
   }
 
 

cmAudioSys.h

@@ -73,6 +73,7 @@ extern "C" {
     kBufTooSmallAsRC,
     kNoMsgWaitingAsRC,
     kMidiSysFailAsRC,
+    kSerialPortFailAsRC,
     kMsgSerializeFailAsRC,
     kStateBufFailAsRC,
     kInvalidArgAsRC,
@@ -197,6 +198,7 @@ extern "C" {
     cmTsQueueCb_t         clientCbFunc; // Called by  cmAudioSysReceiveMsg() to deliver internally generated msg's to the host. 
                                         //  Set to NULL if msg's will be directly returned by buffers passed to cmAudioSysReceiveMsg().
     cmUdpNetH_t           netH;
+    cmSeH_t               serialPortH;
   } cmAudioSysCfg_t;
 
   extern cmAudioSysH_t cmAudioSysNullHandle;

cmGlobal.h

@@ -92,6 +92,12 @@ extern "C" {
                                                                //< If 'b' == 0 then return 'f' with the bits in 'm' cleared.
                                                                //< otherwise return 'f' with the bits in 'm' set.
   
+// In-place assignment version of the above bit operations
+#define cmSetBits(f,m)   ((f) |= (m))                             // Set 'f' with the bits in 'm' set.
+#define cmClrBits(f,m)   ((f) &= (~(m)))                          // Set 'f' with the bits in 'm' cleared.
+#define cmTogBits(f,m)   ((f)^=(m))                               // Return 'f' with the bits in 'm' toggled.
+#define cmEnaBits(f,m,b) ((b) ? cmSetBits(f,m) : cmClrBits(f,m))  // Set or clear bits in 'f' based on bits in 'm' and the state of 'b'.
+
 
 #define cmMin(v0,v1) ((v0)<(v1) ? (v0) : (v1)) //< Return the minimum arg.
 #define cmMax(v0,v1) ((v0)>(v1) ? (v0) : (v1)) //< Return the maximum arg.

cmSerialPort.c

@@ -0,0 +1,579 @@
+#include "cmPrefix.h"
+#include "cmGlobal.h"
+#include "cmRpt.h"
+#include "cmErr.h"
+#include "cmCtx.h"
+#include "cmMem.h"
+#include "cmMallocDebug.h"
+#include "cmSerialPort.h"
+#include "cmThread.h"
+
+#include <poll.h>
+#include <termios.h>
+#include <unistd.h>    // close()
+#include <fcntl.h>     // O_RDWR
+#include <sys/ioctl.h> // TIOCEXCL
+
+typedef struct cmSerialPort_str
+{
+  cmErr_t               _err;
+  cmThreadH_t           _thH; 
+  const char*           _deviceStr;
+  int                   _deviceH;
+  unsigned              _baudRate;
+  unsigned              _cfgFlags;
+  cmSeCallbackFunc_t    _cbFunc;
+  void*                 _cbArg;
+  struct termios        _ttyAttrs;
+  struct pollfd         _pollfd;
+  unsigned              _pollPeriodMs;
+} cmSerialPort_t;
+
+cmSerialPort_t* _cmSePtrFromHandle( cmSeH_t h )
+{
+  cmSerialPort_t* p = (cmSerialPort_t*)h.h;
+  assert(p!=NULL);
+  return p;
+}
+
+void   _cmSeSetClosedState( cmSerialPort_t* p )
+{
+  if( p->_deviceStr != NULL )
+    cmMemFree((char*)(p->_deviceStr));
+     
+  p->_deviceH = -1;
+  p->_deviceStr = NULL;
+  p->_baudRate  = 0;
+  p->_cfgFlags  = 0;
+  p->_cbFunc    = NULL;
+  p->_cbArg     = NULL;
+      
+}
+    
+cmSeRC_t _cmSeGetAttributes( cmSerialPort_t* p, struct termios* attr ) 
+{
+  if( tcgetattr(p->_deviceH, attr) == -1 )
+    return cmErrSysMsg(&p->_err,kGetAttrFailSeRC,errno,"Error getting tty attributes from %s.",p->_deviceStr);
+
+  return kOkSeRC;
+}
+    
+cmSeRC_t _cmSePoll( cmSerialPort_t* p, unsigned timeOutMs )
+{
+  cmSeRC_t rc = kOkSeRC;
+  int sysRC;
+
+  if((sysRC = poll(&p->_pollfd,1,timeOutMs)) == 0)
+    rc = kTimeOutSeRC;
+  else
+  {
+    if( sysRC < 0 )
+      rc = cmErrSysMsg(&p->_err,kReadFailSeRC,errno,"Poll failed on serial port.");
+  }
+  
+  return rc;
+      
+}
+
+bool _cmSeThreadFunc(void* param)
+{
+  cmSerialPort_t* p = (cmSerialPort_t*)param;
+  cmSeH_t h;
+  h.h = p;
+  unsigned readN;
+  if( cmSeIsOpen(h) )
+    cmSeReceiveCbTimeOut(h,p->_pollPeriodMs,&readN);
+  
+      
+  
+  return true;
+}
+
+    
+cmSeRC_t _cmSeDestroy( cmSerialPort_t* p )
+{
+  cmSeRC_t rc = kOkSeRC;
+
+
+  // stop the thread first
+  if( cmThreadDestroy(&p->_thH) != kOkThRC )
+  {
+    rc = cmErrMsg(&p->_err,kThreadErrSeRC,"Thread destroy failed.");
+    goto errLabel;
+  }
+  
+  // Block until all written output has been sent from the device.
+  // Note that this call is simply passed on to the serial device driver.
+  // See tcsendbreak(3) ("man 3 tcsendbreak") for details.
+  if (tcdrain(p->_deviceH) == -1)
+  {
+    rc = cmErrSysMsg(&p->_err,kFlushFailSeRC,errno,"Error waiting for serial device '%s' to drain.", p->_deviceStr );
+    goto errLabel;
+  }
+
+  // It is good practice to reset a serial port back to the state in
+  // which you found it. This is why we saved the original termios struct
+  // The constant TCSANOW (defined in termios.h) indicates that
+  // the change should take effect immediately.
+
+  if (tcsetattr(p->_deviceH, TCSANOW, &p->_ttyAttrs) ==  -1)
+  {
+    rc = cmErrSysMsg(&p->_err,kSetAttrFailSeRC,errno,"Error resetting tty attributes on serial device '%s'.",p->_deviceStr);
+    goto errLabel;
+  }
+	
+  if( p->_deviceH != -1 )
+  {
+    if( close(p->_deviceH ) != 0 )
+    {
+      rc = cmErrSysMsg(&p->_err,kCloseFailSeRC,errno,"Port close failed on serial dvice '%s'.", p->_deviceStr);
+      goto errLabel;
+    }
+		
+    _cmSeSetClosedState(p);
+  }
+
+  cmMemPtrFree(&p);
+
+ errLabel:
+  return rc;      
+}
+    
+
+cmSeH_t cmSeCreate( cmCtx_t* ctx, cmSeH_t* hp, const char* deviceStr, unsigned baudRate, unsigned cfgFlags, cmSeCallbackFunc_t cbFunc, void* cbArg, unsigned pollPeriodMs )
+{
+  cmSeRC_t       rc = kOkSeRC;
+  struct termios options;
+  cmSeH_t h;
+  
+  // if the port is already open then close it
+  if((rc = cmSeDestroy(hp)) != kOkSeRC )
+    return *hp;
+
+  cmSerialPort_t* p = cmMemAllocZ(cmSerialPort_t,1);
+  
+  cmErrSetup(&p->_err,&ctx->rpt,"Serial Port");
+
+  p->_deviceH = -1;
+    
+	// open the port		
+	if( (p->_deviceH = open(deviceStr, O_RDWR | O_NOCTTY | O_NONBLOCK)) == -1 )
+	{
+		rc = cmErrSysMsg(&p->_err,kOpenFailSeRC,errno,"Error opening serial '%s'",cmStringNullGuard(deviceStr));
+		goto errLabel;;
+	}
+
+  // Note that open() follows POSIX semantics: multiple open() calls to 
+  // the same file will succeed unless the TIOCEXCL ioctl is issued.
+  // This will prevent additional opens except by root-owned processes.
+  // See tty(4) ("man 4 tty") and ioctl(2) ("man 2 ioctl") for details.
+  
+  if( ioctl(p->_deviceH, TIOCEXCL) == -1 )
+  {
+    rc = cmErrSysMsg(&p->_err,kResourceNotAvailableSeRC,errno,"The serial device '%s' is already in use.", cmStringNullGuard(deviceStr));
+    goto errLabel;
+  }
+
+
+  // Now that the device is open, clear the O_NONBLOCK flag so 
+  // subsequent I/O will block.
+  // See fcntl(2) ("man 2 fcntl") for details.
+ 	/*
+    if (fcntl(_deviceH, F_SETFL, 0) == -1)
+
+    {
+    _error("Error clearing O_NONBLOCK %s - %s(%d).", pr.devFilePath.c_str(), strerror(errno), errno);
+    goto errLabel;
+    }
+	*/
+	
+  // Get the current options and save them so we can restore the 
+  // default settings later.
+  if (tcgetattr(p->_deviceH, &p->_ttyAttrs) == -1)
+  {
+    rc = cmErrSysMsg(&p->_err,kGetAttrFailSeRC,errno,"Error getting tty attributes from the device '%s'.",deviceStr);
+    goto errLabel;
+  }
+
+
+  // The serial port attributes such as timeouts and baud rate are set by 
+  // modifying the termios structure and then calling tcsetattr to
+  // cause the changes to take effect. Note that the
+  // changes will not take effect without the tcsetattr() call.
+  // See tcsetattr(4) ("man 4 tcsetattr") for details.
+  options = p->_ttyAttrs;
+
+
+  // Set raw input (non-canonical) mode, with reads blocking until either 
+  // a single character has been received or a 100ms timeout expires.
+  // See tcsetattr(4) ("man 4 tcsetattr") and termios(4) ("man 4 termios") 
+  // for details.
+  cfmakeraw(&options);
+  options.c_cc[VMIN] = 1;
+  options.c_cc[VTIME] = 1;
+
+
+  // The baud rate, word length, and handshake options can be set as follows:
+
+ 
+	// set baud rate
+  cfsetspeed(&options, baudRate);
+  
+  options.c_cflag |=  CREAD | CLOCAL; // ignore modem controls
+
+  // set data word size
+  cmClrBits(options.c_cflag, CSIZE); // clear the word size bits
+  cmEnaBits(options.c_cflag,	CS5,			cmIsFlag(cfgFlags, kDataBits5SeFl));
+  cmEnaBits(options.c_cflag,	CS6,			cmIsFlag(cfgFlags, kDataBits6SeFl));
+  cmEnaBits(options.c_cflag,	CS7,			cmIsFlag(cfgFlags, kDataBits7SeFl));
+  cmEnaBits(options.c_cflag,	CS8,			cmIsFlag(cfgFlags, kDataBits8SeFl));
+
+  cmClrBits(options.c_cflag, PARENB); // assume no-parity
+
+  // if the odd or even parity flag is set
+  if( cmIsFlag( cfgFlags, kEvenParitySeFl) || cmIsFlag( cfgFlags, kOddParitySeFl ) )
+  {
+    cmSetBits(options.c_cflag,	PARENB);
+    	
+    if( cmIsFlag(cfgFlags, kOddParitySeFl ) )
+      cmSetBits( options.c_cflag,	PARODD);
+  }
+
+	// set two stop bits    
+  cmEnaBits( options.c_cflag, CSTOPB, cmIsFlag(cfgFlags, k2StopBitSeFl));
+    
+    		    
+  // set hardware flow control
+  //cmEnaBits(options.c_cflag,		CCTS_OFLOW, 	cmIsFlag(cfgFlags, kCTS_OutFlowCtlFl)); 
+	//cmEnaBits(options.c_cflag, 	CRTS_IFLOW, 	cmIsFlag(cfgFlags, kRTS_InFlowCtlFl));
+	//cmEnaBits(options.c_cflag, 	CDTR_IFLOW, 	cmIsFlag(cfgFlags, kDTR_InFlowCtlFl));
+	//cmEnaBits(options.c_cflag, 	CDSR_OFLOW, 	cmIsFlag(cfgFlags, kDSR_OutFlowCtlFl));
+	//cmEnaBits(options.c_cflag, 	CCAR_OFLOW, 	cmIsFlag(cfgFlags, kDCD_OutFlowCtlFl));
+    
+	cmClrBits(options.c_cflag,CRTSCTS); // turn-off hardware flow control
+
+	// 7 bit words, enable even parity, CTS out ctl flow, RTS in ctl flow
+	// note: set PARODD and PARENB to enable odd parity)
+	//options.c_cflag |= (CS7 | PARENB | CCTS_OFLOW | CRTS_IFLOW );
+
+  // Cause the new options to take effect immediately.
+  if (tcsetattr(p->_deviceH, TCSANOW, &options) == -1)
+  {
+
+    rc = cmErrSysMsg(&p->_err,kSetAttrFailSeRC,errno,"Error setting tty attributes on serial device %.", deviceStr);
+    goto errLabel;
+  }
+  
+  memset(&p->_pollfd,0,sizeof(p->_pollfd));
+  p->_pollfd.fd     = p->_deviceH;
+  p->_pollfd.events = POLLIN;
+  
+  p->_deviceStr    = cmMemAllocStr( deviceStr );
+  p->_baudRate     = baudRate;
+	p->_cfgFlags     = cfgFlags;
+  p->_cbFunc       = cbFunc;
+  p->_cbArg        = cbArg;
+  p->_pollPeriodMs = pollPeriodMs;
+
+  // create the listening thread
+  if( cmThreadCreate( &p->_thH, _cmSeThreadFunc, p, &ctx->rpt) != kOkThRC )
+  {
+    rc = cmErrMsg(&p->_err,kThreadErrSeRC,"Thread initialization failed.");
+    goto errLabel;
+  }
+
+  if( hp != NULL )
+    hp->h = p;
+  else
+    h.h = p;
+  
+ errLabel:
+  if( rc != kOkSeRC )
+  {
+    _cmSeDestroy(p);
+    h.h = NULL;
+	}
+  
+  return hp != NULL ? *hp : h;
+  
+}
+
+cmSeRC_t cmSeDestroy(cmSeH_t* hp )
+{
+  cmSeRC_t rc = kOkSeRC; 
+  
+  if( hp==NULL || !cmSeIsOpen(*hp) )
+    return kOkSeRC;
+
+  cmSerialPort_t* p = _cmSePtrFromHandle(*hp);
+
+  if((rc = _cmSeDestroy(p)) != kOkSeRC )
+    return rc;
+
+  hp->h = NULL;
+  
+  return rc;
+}
+
+cmSeRC_t  cmSeSetCallback( cmSeH_t h, cmSeCallbackFunc_t cbFunc, void* cbArg  )
+{
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  p->_cbFunc  = cbFunc;
+  p->_cbArg   = cbArg;
+  return kOkSeRC;
+}
+
+cmSeRC_t  cmSeStart( cmSeH_t h )
+{
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  
+  if( cmThreadPause(p->_thH,0) != kOkThRC )
+    return cmErrMsg(&p->_err,kThreadErrSeRC,0,"Thread start failed.");
+  
+  return kOkSeRC;
+}
+
+
+
+bool cmSeIsOpen( cmSeH_t h)
+{
+  if( h.h == NULL )
+    return false;
+  
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  return p->_deviceH != -1;
+}
+
+cmSeRC_t cmSeSend( cmSeH_t h, const void* byteA, unsigned byteN )
+{
+  cmSeRC_t        rc = kOkSeRC;
+  cmSerialPort_t* p  = _cmSePtrFromHandle(h);
+      
+  if( !cmSeIsOpen(h)  )
+    return cmErrWarnMsg( &p->_err, kResourceNotAvailableSeRC, "An attempt was made to transmit from a closed serial port.");
+        
+  if( byteN == 0 )
+    return rc;
+        
+  // implement a non blocking write - if less than all the bytes were written then iterate
+  unsigned i = 0;
+  do
+  {
+    int n = 0;
+    if((n = write( p->_deviceH, ((char*)byteA)+i, byteN-i )) == -1 )
+    {
+      rc = cmErrSysMsg(&p->_err,kWriteFailSeRC,errno,"Write failed on serial port '%s'.", p->_deviceStr );
+      break;
+    }
+
+    i += n;
+
+      
+  }while( i<byteN );
+
+  return rc;
+  
+}
+
+
+cmSeRC_t cmSeReceiveCbNb( cmSeH_t h, unsigned* readN_Ref)
+{
+  cmSeRC_t        rc   = kOkSeRC;
+  cmSerialPort_t* p    = _cmSePtrFromHandle(h);
+  const unsigned  bufN = 512;
+  char            buf[ bufN ];
+
+  if( readN_Ref != NULL)
+    *readN_Ref = 0;
+
+  if((rc = cmSeReceiveNb(h,buf,bufN,readN_Ref)) == kOkSeRC )
+    if( readN_Ref > 0 && p->_cbFunc != NULL )
+      p->_cbFunc( p->_cbArg, buf, *readN_Ref );
+
+  return rc;
+  
+}
+  
+cmSeRC_t cmSeReceiveCbTimeOut( cmSeH_t h, unsigned timeOutMs, unsigned* readN_Ref)
+{
+  cmSeRC_t        rc;
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+
+  if((rc = _cmSePoll(p,timeOutMs)) == kOkSeRC )
+    rc = cmSeReceiveCbNb(h,readN_Ref);
+  return rc;
+  
+}
+
+cmSeRC_t cmSeReceiveNb( cmSeH_t h, void* buf, unsigned bufN, unsigned* readN_Ref)
+{
+  cmSeRC_t        rc = kOkSeRC;
+  cmSerialPort_t* p  = _cmSePtrFromHandle(h);
+
+  if( readN_Ref != NULL )
+    *readN_Ref = 0;
+  
+  if( !cmSeIsOpen(h)  )
+    return cmErrWarnMsg(&p->_err, kResourceNotAvailableSeRC, "An attempt was made to read from a closed serial port.");
+  
+  int       n    = 0;
+  
+  // if attempt to read the port succeeded ...
+  if((n =read( p->_deviceH, buf, bufN )) != -1 )
+    *readN_Ref = n;
+  else
+  {
+    // ... or failed and it wasn't because the port was empty
+    if( errno != EAGAIN)
+      rc = cmErrSysMsg(&p->_err,kReadFailSeRC,errno,"An attempt to read the serial port '%s' failed.", p->_deviceStr );
+  }
+    
+  return rc;
+}
+    
+cmSeRC_t cmSeReceive( cmSeH_t h, void* buf, unsigned bufByteN, unsigned timeOutMs, unsigned* readN_Ref )
+{
+  cmSeRC_t        rc = kOkSeRC;
+  cmSerialPort_t* p  = _cmSePtrFromHandle(h);
+  
+  if((rc = _cmSePoll(p,timeOutMs)) == kOkSeRC )
+    rc = cmSeReceiveNb(h,buf,bufByteN,readN_Ref);
+  
+  return rc;  
+}
+
+const char* cmSeDevice( cmSeH_t h)
+{
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  return p->_deviceStr;
+}
+    
+unsigned    cmSeBaudRate( cmSeH_t h)
+{
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  return p->_baudRate;
+}
+
+unsigned    cmSeCfgFlags( cmSeH_t h)
+{
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+  return p->_cfgFlags;
+}
+
+unsigned cmSeReadInBaudRate( cmSeH_t h )
+{
+	struct termios attr;
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+	
+	if((_cmSeGetAttributes(p,&attr)) != kOkSeRC )
+		return 0;
+
+	return cfgetispeed(&attr);	
+  
+}
+
+unsigned cmSeReadOutBaudRate( cmSeH_t h)
+{
+	struct termios attr;
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+	
+	if((_cmSeGetAttributes(p,&attr)) != kOkSeRC )
+		return 0;
+		
+	return cfgetospeed(&attr);	
+  
+}
+
+unsigned cmSeReadCfgFlags( cmSeH_t h)
+{
+	struct termios attr;	
+	unsigned result = 0;
+  cmSerialPort_t* p = _cmSePtrFromHandle(h);
+
+	if((_cmSeGetAttributes(p,&attr)) == false )
+		return 0;
+
+	switch( attr.c_cflag & CSIZE )
+	{
+		case CS5:
+			cmSetBits( result, kDataBits5SeFl);
+			break;
+			
+		case CS6:
+			cmSetBits( result, kDataBits6SeFl );
+			break;
+			
+		case CS7:
+			cmSetBits( result, kDataBits7SeFl);
+			break;
+			
+		case CS8:
+			cmSetBits( result, kDataBits8SeFl);
+			break;
+	}
+	
+	cmEnaBits( result, k2StopBitSeFl, cmIsFlag(  attr.c_cflag, CSTOPB ));
+	cmEnaBits( result, k1StopBitSeFl, !cmIsFlag( attr.c_cflag, CSTOPB ));
+
+	if( cmIsFlag( attr.c_cflag, PARENB ) )
+	{
+		cmEnaBits( result, kOddParitySeFl, 	cmIsFlag( attr.c_cflag, PARODD ));
+		cmEnaBits( result, kEvenParitySeFl, 	!cmIsFlag( attr.c_cflag, PARODD ));
+	}		
+	
+	return result;
+  
+}
+
+
+//====================================================================================================
+//
+//
+
+
+void _cmSePortTestCb( void* arg, const void* byteA, unsigned byteN )
+{
+  const char* text = (const char*)byteA;
+      
+  for(unsigned i=0; i<byteN; ++i)
+    printf("%c:%i ",text[i],(int)text[i]);
+
+  if( byteN )
+    fflush(stdout);      
+}
+
+cmSeRC_t cmSePortTest(cmCtx_t* ctx)
+{
+  // Use this test an Arduino running study/serial/arduino_xmt_rcv/main.c  
+  cmSeRC_t                  rc             = kOkSeRC;
+  const char*               device         = "/dev/ttyACM0";
+  unsigned                  baud           = 38400;
+  unsigned                  serialCfgFlags = kDefaultCfgSeFlags;
+  unsigned                  pollPeriodMs   = 50;
+  cmSeH_t                   h;
+
+  h.h = NULL;
+  
+  h = cmSeCreate(ctx,&h,device,baud,serialCfgFlags,_cmSePortTestCb,NULL,pollPeriodMs);
+
+  if( cmSeIsOpen(h) )
+    cmSeStart(h);
+
+  bool quitFl = false;
+  printf("q=quit\n");
+  while(!quitFl)
+  {
+    char c = getchar();
+    
+    if( c == 'q')
+      quitFl = true;
+    else
+      if( '0' <= c && c <= 'z' )
+        cmSeSend(h,&c,1);
+      
+    
+  }
+
+  cmSeDestroy(&h);
+  return rc;
+}

cmSerialPort.h

@@ -0,0 +1,93 @@
+#ifndef cmSerialPort_h
+#define cmSerialPort_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+  typedef unsigned cmSeRC_t;
+
+  enum
+  {
+   kOkSeRC = cmOkRC,
+   kFlushFailSeRC,
+   kSetAttrFailSeRC,
+   kCloseFailSeRC,
+   kOpenFailSeRC,
+   kResourceNotAvailableSeRC,
+   kGetAttrFailSeRC,
+   kWriteFailSeRC,
+   kReadFailSeRC,
+   kTimeOutSeRC,
+   kThreadErrSeRC
+  };
+
+
+  enum
+  {
+   kDataBits5SeFl 	= 0x0001,
+   kDataBits6SeFl 	= 0x0002,
+   kDataBits7SeFl 	= 0x0004,
+   kDataBits8SeFl 	= 0x0008,
+   kDataBitsSeMask	= 0x000f,
+   
+   k1StopBitSeFl		= 0x0010,
+   k2StopBitSeFl 	  = 0x0020,
+   
+   kEvenParitySeFl	= 0x0040,
+   kOddParitySeFl	  = 0x0080,
+   kNoParitySeFl		= 0x0000,
+
+   kDefaultCfgSeFlags = kDataBits8SeFl | k1StopBitSeFl | kNoParitySeFl
+  };
+
+
+
+  
+  typedef void (*cmSeCallbackFunc_t)( void* cbArg, const void* byteA, unsigned byteN );
+
+  typedef cmHandle_t cmSeH_t;
+    
+  cmSeH_t   cmSeCreate( cmCtx_t* ctx, cmSeH_t* hp, const char* device, unsigned baudRate, unsigned cfgFlags, cmSeCallbackFunc_t cbFunc, void* cbArg, unsigned pollPeriodMs );
+  cmSeRC_t  cmSeDestroy(cmSeH_t* hp );
+
+  cmSeRC_t  cmSeSetCallback( cmSeH_t h, cmSeCallbackFunc_t cbFunc, void* cbArg  );
+  cmSeRC_t  cmSeStart( cmSeH_t h );
+
+  bool cmSeIsOpen( cmSeH_t h);
+    
+  cmSeRC_t cmSeSend( cmSeH_t h, const void* byteA, unsigned byteN );
+
+
+  // Make callback to listener with result of read - Non-blocking
+  cmSeRC_t cmSeReceiveCbNb( cmSeH_t h, unsigned* readN_Ref);
+  
+  // Make callback to listener with result of read - Block for up to timeOutMs.
+  cmSeRC_t cmSeReceiveCbTimeOut( cmSeH_t h, unsigned timeOutMs, unsigned* readN_Ref); 
+
+  // Return result of read in buf[bufByteN] - Non-blocking.
+  cmSeRC_t cmSeReceiveNb( cmSeH_t h, void* buf, unsigned bufByteN, unsigned* readN_Ref);
+    
+  // Return result of read in buf[bufByteN] - Block for up to timeOutMs.
+  cmSeRC_t cmSeReceive( cmSeH_t h, void* buf, unsigned bufByteN, unsigned timeOutMs, unsigned* readN_Ref );
+
+  const char* cmSeDevice( cmSeH_t h);
+    
+  // Get the baud rate and cfgFlags used to initialize the port
+  unsigned    cmSeBaudRate( cmSeH_t h);
+  unsigned    cmSeCfgFlags( cmSeH_t h);
+
+  // Get the baud rate and cfg flags by reading the device.
+  // Note the the returned buad rate is a system id rather than the actual baud rate,
+  // however the cfgFlags are converted to the same kXXXFl defined in this class.
+  unsigned cmSeReadInBaudRate( cmSeH_t h );
+  unsigned cmSeReadOutBaudRate( cmSeH_t h);
+  unsigned cmSeReadCfgFlags( cmSeH_t h);
+
+  cmSeRC_t cmSePortTest(cmCtx_t* ctx);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

dsp/cmDspBuiltIn.c

@@ -27,6 +27,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmDspSys.h"
@@ -5564,6 +5565,7 @@ cmDspClassConsFunc_t _cmDspClassBuiltInArray[] =
   cmActiveMeasClassCons,
   cmAmSyncClassCons,
   cmNanoMapClassCons,
+  cmPicadaeClassCons,
   cmRecdPlayClassCons,
   cmGoertzelClassCons,
   cmSyncRecdClassCons,

dsp/cmDspClass.c

@@ -15,6 +15,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"
@@ -128,7 +129,7 @@ void* cmDspInstAllocate(
     }
 
     // determine the space needed for matrices of known size
-    if( cmIsFlag(flags,kMtxDsvFl) && (rn*argV[i].cn) )
+    if( cmIsFlag(flags,kMtxDsvFl) && (rn*argV[i].cn)>0 )
     {
       unsigned n = cmDsvByteCount( flags, rn, argV[i].cn );
       varDataByteCnt += n;
@@ -238,7 +239,7 @@ void* cmDspInstAllocate(
     }
 
     // assign memory to the matrix types of known size
-    if( cmIsFlag(flags,kMtxDsvFl) && (rn*argV[i].cn) )
+    if( cmIsFlag(flags,kMtxDsvFl) && (rn*argV[i].cn)>0 )
     {
       cmDsvSetMtx(  &ip->varArray[i].value, flags, varDataPtr, rn, argV[i].cn );
       unsigned n = cmDsvByteCount( flags, rn, argV[i].cn );

dsp/cmDspFx.c

@@ -22,6 +22,7 @@
 #include "cmThread.h" 
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspKr.c

@@ -18,6 +18,8 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
+
 //( { file_desc:"'snap' audio effects performance analysis units." kw:[snap]}
 
 #include "cmTime.h"
@@ -2801,6 +2803,134 @@ cmDspClass_t* cmNanoMapClassCons( cmDspCtx_t* ctx )
   return &_cmNanoMapDC;
 }
 
+//------------------------------------------------------------------------------------------------------------
+//)
+//( { label:cmDspPicadae file_desc:"Control a MIDI synth." kw:[sunit] }
+
+enum
+{
+  kPgmPcId,
+  kStatusPcId,
+  kD0PcId,
+  kD1PcId,
+  kThruPcId
+};
+
+cmDspClass_t _cmPicadaeDC;
+
+typedef struct
+{
+  cmDspInst_t inst;
+
+} cmDspPicadae_t;
+
+cmDspRC_t _cmDspPicadaeSend( cmDspCtx_t* ctx, cmDspInst_t* inst, unsigned st, unsigned d0, unsigned d1 )
+{
+  cmDspSetUInt(ctx,inst,kD1PcId,d1);
+  cmDspSetUInt(ctx,inst,kD0PcId,d0);
+  cmDspSetUInt(ctx,inst,kStatusPcId,st);
+  return kOkDspRC;
+}
+
+void _cmDspPicadaePgm( cmDspCtx_t* ctx, cmDspInst_t* inst, unsigned pgm )
+{
+  //cmDspPicadae_t* p = (cmDspPicadae_t*)inst;
+
+  unsigned i;
+        
+  for(i=0; i<kMidiChCnt; ++i)
+  {
+    _cmDspPicadaeSend(ctx,inst,kCtlMdId+i,121,0); // reset all controllers
+    _cmDspPicadaeSend(ctx,inst,kCtlMdId+i,123,0); // turn all notes off
+    _cmDspPicadaeSend(ctx,inst,kCtlMdId+i,0,0);   // switch to bank 0
+    _cmDspPicadaeSend(ctx,inst,kPgmMdId+i,pgm,0); // send pgm change
+    cmSleepMs(15);
+  }
+  
+}
+
+cmDspInst_t*  _cmDspPicadaeAlloc(cmDspCtx_t* ctx, cmDspClass_t* classPtr, unsigned storeSymId, unsigned instSymId, unsigned id, unsigned va_cnt, va_list vl )
+{
+  cmDspVarArg_t args[] =
+  {
+    { "pgm",    kPgmPcId,    0,  0,              kInDsvFl | kUIntDsvFl | kOptArgDsvFl, "Reprogram all channels to this pgm." },
+    { "status", kStatusPcId, 0,  0,  kOutDsvFl | kInDsvFl | kUIntDsvFl | kOptArgDsvFl, "MIDI status" },
+    { "d0",     kD0PcId,     0,  0,  kOutDsvFl | kInDsvFl | kUIntDsvFl | kOptArgDsvFl, "MIDI channel message d0" },
+    { "d1",     kD1PcId,     0,  0,  kOutDsvFl | kInDsvFl | kUIntDsvFl | kOptArgDsvFl, "MIDI channel message d1" },
+    { "thru",   kThruPcId,   0,  0,              kInDsvFl | kBoolDsvFl | kOptArgDsvFl, "Enable pass through."},
+    { NULL, 0, 0, 0, 0 }
+  };
+
+  cmDspPicadae_t* p = cmDspInstAlloc(cmDspPicadae_t,ctx,classPtr,args,instSymId,id,storeSymId,va_cnt,vl);
+  
+  cmDspSetDefaultUInt(ctx,&p->inst, kPgmPcId, 0, 0 );
+
+  return &p->inst;
+}
+
+cmDspRC_t _cmDspPicadaeReset(cmDspCtx_t* ctx, cmDspInst_t* inst, const cmDspEvt_t* evt )
+{
+  cmDspRC_t      rc = kOkDspRC;
+
+  cmDspApplyAllDefaults(ctx,inst);
+
+  _cmDspPicadaePgm(ctx,inst,cmDspUInt(inst,kPgmPcId));
+
+  return rc;
+} 
+
+cmDspRC_t _cmDspPicadaeRecv(cmDspCtx_t* ctx, cmDspInst_t* inst, const cmDspEvt_t* evt )
+{
+  //cmDspPicadae_t* p = (cmDspPicadae_t*)inst;
+
+  switch( evt->dstVarId )
+  {
+    case kPgmPcId:
+      cmDspSetEvent(ctx,inst,evt);
+      _cmDspPicadaePgm(ctx,inst,cmDspUInt(inst,kPgmPcId));
+      break;
+
+    case kStatusPcId:
+      {
+        unsigned status = cmDsvGetUInt(evt->valuePtr);        
+        unsigned stat_no_ch = status & 0xf0;
+        if( stat_no_ch == kNoteOnMdId || stat_no_ch == kNoteOffMdId || stat_no_ch == kCtlMdId  )
+        {
+          //unsigned d0 = cmDspUInt(inst,kD0PcId);
+          unsigned ch = 0; //d0 % 8;
+          status = (status & 0xf0) + ch;
+          cmDspSetUInt(ctx,inst,kStatusPcId,status);
+        }
+       
+      }
+      break;
+
+
+    default:
+      cmDspSetEvent(ctx,inst,evt);
+      break;
+  }
+
+
+  return kOkDspRC;
+}
+
+cmDspClass_t* cmPicadaeClassCons( cmDspCtx_t* ctx )
+{
+  cmDspClassSetup(&_cmPicadaeDC,ctx,"Picadae",
+    NULL,
+    _cmDspPicadaeAlloc,
+    NULL,
+    _cmDspPicadaeReset,
+    NULL,
+    _cmDspPicadaeRecv,
+    NULL,
+    NULL,
+    "Picadaesynth Mapper");
+
+  return &_cmPicadaeDC;
+}
+
 //------------------------------------------------------------------------------------------------------------
 //)
 //( { label:cmDspRecdPlay file_desc:"Record audio segments from a live perfromance and play them back at a later time" kw:[sunit] }

dsp/cmDspKr.h

@@ -17,6 +17,7 @@ extern "C" {
   struct cmDspClass_str* cmActiveMeasClassCons( cmDspCtx_t* ctx );
   struct cmDspClass_str* cmAmSyncClassCons( cmDspCtx_t* ctx );
   struct cmDspClass_str* cmNanoMapClassCons( cmDspCtx_t* ctx );
+  struct cmDspClass_str* cmPicadaeClassCons( cmDspCtx_t* ctx );
   struct cmDspClass_str* cmRecdPlayClassCons( cmDspCtx_t* ctx );
   struct cmDspClass_str* cmGoertzelClassCons( cmDspCtx_t* ctx );
   struct cmDspClass_str* cmSyncRecdClassCons( cmDspCtx_t* ctx );

dsp/cmDspNet.c

@@ -16,6 +16,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspNet.h

@@ -72,6 +72,7 @@ extern "C" {
     cmDspPresetMgr_t    pm;
     unsigned            nextInstId;
     unsigned            pgmIdx;
+    cmSeH_t             serialPortH;
 
 
     cmUdpNetH_t           netH;          //

dsp/cmDspPgm.c

@@ -17,6 +17,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspPgmKr.c

@@ -19,6 +19,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspPgmKrChain.c

@@ -18,6 +18,7 @@
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
 #include "cmTime.h"
+#include "cmSerialPort.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"
 #include "cmDspCtx.h"

dsp/cmDspPgmKrChain2.c

@@ -17,6 +17,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspPgmKrTimeLineLite.c

@@ -19,6 +19,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"
@@ -61,7 +62,7 @@ cmDspRC_t _cmDspSysPgm_TimeLineLite(cmDspSysH_t h, void** userPtrPtr )
   cmDspInst_t* ai0 = cmDspSysAllocInst(h,"AudioIn",     NULL,  1, 0);
   cmDspInst_t* ai1 = cmDspSysAllocInst(h,"AudioIn",     NULL,  1, 1);
   //cmDspInst_t* mip = cmDspSysAllocInst(h,"MidiIn",      NULL,  2, "MOTU - Traveler mk3", "MIDI Port");
-  cmDspInst_t* mip = cmDspSysAllocInst(h,"MidiIn",      NULL,  2, "Apple Inc. - IAC Driver", "Bus 1");
+  //cmDspInst_t* mip = cmDspSysAllocInst(h,"MidiIn",      NULL,  2, "Apple Inc. - IAC Driver", "Bus 1");
   
   cmDspInst_t* tlp  = cmDspSysAllocInst(h,"TimeLine",    "tl",  2, r.tlFn, r.tlPrefixPath );
   cmDspInst_t* scp  = cmDspSysAllocInst(h,"Score",       "sc",  1, r.scFn );

dsp/cmDspPgmKrTksb.c

@@ -17,6 +17,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspPgmPP.c

@@ -17,6 +17,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspPgmPPMain.c

@@ -17,6 +17,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"

dsp/cmDspSys.c

@@ -19,6 +19,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmAudioSys.h"
 #include "cmProcObj.h"
 #include "cmDspCtx.h"
@@ -165,7 +166,7 @@ cmDspRC_t _cmDspSysFinalize( cmDsp_t* p )
   return rc;
 }
 
-cmDspRC_t cmDspSysInitialize( cmCtx_t* ctx, cmDspSysH_t* hp, cmUdpNetH_t netH )
+cmDspRC_t cmDspSysInitialize( cmCtx_t* ctx, cmDspSysH_t* hp, cmUdpNetH_t netH, cmSeH_t serialPortH )
 {
   unsigned        i;
   cmDspRC_t       rc     = kOkDspRC;
@@ -180,6 +181,7 @@ cmDspRC_t cmDspSysInitialize( cmCtx_t* ctx, cmDspSysH_t* hp, cmUdpNetH_t netH )
   //p->ctx.ctx   = asCtx;
   p->cmCtx       = *ctx;
   p->netH        = netH;
+  p->serialPortH = serialPortH;
   p->pgmIdx      = cmInvalidIdx;
 
   // create the DSP class  linked heap
@@ -1560,6 +1562,13 @@ cmSymTblH_t  cmDspSysSymbolTable( cmDspSysH_t h )
   return p->ctx.stH;  
 }
 
+cmSeH_t      cmDspSysSerialPort( cmDspSysH_t h )
+{
+  cmDsp_t* p = _cmDspHandleToPtr(h);
+  return p->serialPortH;
+}
+
+
 unsigned     cmDspSysRegisterStaticSymbol( cmDspSysH_t h, const cmChar_t* symLabel )
 { return cmSymTblRegisterStaticSymbol( cmDspSysSymbolTable(h), symLabel ); }
 

dsp/cmDspSys.h

@@ -23,7 +23,7 @@ extern "C" {
   //  Control Functions
   //
 
-  cmDspRC_t cmDspSysInitialize( cmCtx_t* ctx, cmDspSysH_t* hp, cmUdpNetH_t netH );
+  cmDspRC_t cmDspSysInitialize( cmCtx_t* ctx, cmDspSysH_t* hp, cmUdpNetH_t netH, cmSeH_t serialPortH );
   cmDspRC_t cmDspSysFinalize(  cmDspSysH_t* hp );
   
   bool      cmDspSysIsValid(   cmDspSysH_t h );
@@ -156,6 +156,7 @@ extern "C" {
   double          cmDspSysSampleRate( cmDspSysH_t h );
   cmJsonH_t       cmDspSysPgmRsrcHandle( cmDspSysH_t h );
   cmSymTblH_t     cmDspSysSymbolTable( cmDspSysH_t h );
+  cmSeH_t         cmDspSysSerialPort( cmDspSysH_t h );
 
   unsigned        cmDspSysRegisterStaticSymbol( cmDspSysH_t h, const cmChar_t* symLabel );
   unsigned        cmDspSysRegisterSymbol( cmDspSysH_t h, const cmChar_t* symLabel );

dsp/cmDspUi.c

@@ -19,6 +19,7 @@
 #include "cmThread.h"
 #include "cmUdpPort.h"
 #include "cmUdpNet.h"
+#include "cmSerialPort.h"
 #include "cmTime.h"
 #include "cmAudioSys.h"