CONTENTS: 1) TODO List 2) OSX Install Notes SPAT LAB SETUP: + 1. Stereo a. TotalMix - select 'diff. stereo' snapshot b. mixer: Recall preset 91 ('stereo diff') + 2. Direct - 24 channels - each channel goes in and out on same number. a. TotalMix - select 'DTS_24ch' b. mixer: Recall preset 96 ('24ch firecac ufx') STRATEGY: + implement highly parallel version - which can take advantage of multiple processors to do more - acoustic pitch tracking, source separation based fades TODO: + When a cmMsgList item is selected it should send out the selected index after the individual data items rather than before them - this way the index can be used as a definitive signal to perform some action on the previously transmitted data items. + cmJson and cmLex should report the name of the file when with syntax error messages. + Use CSV for mod score file format (to eliminate need for labels) + Autoload of default pgm cfg, program, enable audio, sequence, score location. + (done) Circuit switcher patch. + Review and document the app threading and locking during audio file loading. + Remove old performance evaluation code from cmScore. + All programs should be able to reload without crashing via enabling/disabling audio. + (in new version) Select and save audio devices. + (done) Mac Conversion + (done) Live MIDI - to test audio/MIDI delay. + (done) As threshold increases overall volume decreases - add a compensation algorithm. + There are unintialized variable warnings on the release build. + Add preset delete. + All uses of va_copy() should have a complimentary va_end() + The list boxes do not show the currently selected item. + (done)MIDI note messages are sent but do not trigger notes on OSX. *** Usage Notes live - Disconnects WT cmd input (WT will not receive an 'on' msg) Disconnects TL reset input (TL will not receive a 'reset' msg) Disconnects MFP sel input (MPF will not receive an 'on' msg) Switches audio input to KR from WT to AIN. Turn the 'meas' checkbox 'on'. simulate - Turn the 'audio in' checkbox 'on'. Switch MFP output from SF to Nano. (SF MIDI input then comes from the MIDI port.) audio in - Switch audio input to KR from WT to AIN. meas - Instruct the SF to generate measurement outputs for the active meas. unit. Otherwise the measurements must be loaded from the recorded measurment list. print - Print a report from the SF. quiet - Turn off SF output. LA Secs - Fragment recd/play unit look-ahead time in seconds. Fade DbpSec - Framgent recd/play unit fade out time (time to fade to 0 following a fade msg) *** Cross-fade Notes Cross-fades are initiated by sending any msg to the 'AvailCh.trig' input. The 'AvailCh' object then toggles the parameter router channels and xfader gates. Only after this should the new parameter values be transmitted either from the 'ActiveMeas' object (through the scale range chains) or directly from the 'ScMod' object. Sending parameter values prior to triggering the 'AvailCh' will result in the parameters being sent to the currently active 'Kr'. This will result in two possibly unintended effects: 1) The effect of the parameter will be heard immediately - possibly resulting in distortion. 2) If a subsequent trigger is sent to 'AvailCh' the parameters will be routed to the fade-out (current) channel rather than the fade-in (next) channel. **** Live Test Score + Line 1048 has a red G#5 immediiately following another G#5. Is this correct? For now the second G#5 has been marked as a 'skip'. + Changed Tempo sections 25,26,27 to 40,47,47a + Measurements are taken for sections 51-54 but these sections follow bar 136 and are therefore outside the test. These sections have therefore been redirected to the downbeat of 201-204. *** Testing Notes: + Equipment List: Four Microphones: Four performance/ Four recording 2 inside 2 inside 2 overhead 2 overhead 4 powered speakers 2 Mixers (1 performance 1 recording) Performance Computer (harpo)/ Audio Interface (delta1010) / MIDI interface (Fastlane) Recording Computer (crel) / Audio Interface (delta 1010) / MIDI interface (???) Sensor Strip + Performance Setup +------ + Mic0 ----------->| | Mic1 ----------->| | sends +-----+ +-------+ Mic2 ----------->| |------->| A/D | | | +------+ +--------+ Mic3 ----------->| Mixer |------->| |------>| harpo |<-------| MIDI |<-----| sensor | aux | | | | | | +------+ | strip | Spkr0 <----------| |<-------| |<------| | +--------+ Spkr1 <----------| |<-------| | +------ + main | | | | Spkr2 <----------| |<-------| D/A | Spkr3 <----------| |<-------| | +-------+ +-----+ + Software Development 1) Create Score File 2) Create Recording Program (test with long MIDI playback generating audio - look for drift) Record the index of each MIDI event at it's location in an audio channel. 3) (DONE) The ability for the measurements to be called at the correct time must be built in. (or alternatively to use stored effects). 4) Effects applied to the playback fragments. 5) Allow all variables and patch connections to be set from the scMod script and have multiple scripts with varynig effects setups. 6) All 4 input mic's should go through the computer in order that they remain in phase (even though the overhead mics will not be used in the effect). 7) Add comb filters tuned according to the current MIDI notes as an additional effect. 8) Add EQ output stage (use mixer). 9) Compressor on input (???). 10) The dry signal should be able to be routed to seperate output channels - around the compressor. 11) CROSSFADE BUG - (DONE?) This may be fixed by the change to cmDspAvailCh which handles the case where no channels are available by sending an error message but not actually changing the state of the cross fader. 12) Create a mode in scMod which increments values based on an onset detector. So that changes only happen on attacks. This still doesn't help if the pedal is down (or if notes are sustained) but otherwise might be a better way to ramp parameters. 13) When scanning past ramping variables in scMod the end value should be taken as the next variable(???) - this is not necessarily correct because one never knows where a timed change may end - maybe ramped variables should include a 'skip value' giving the next ambient value for the ramped variable - experiment with this to figure out what works. + Experiments: 1) Speaker placement and live/electronics mix. 2) Sliver mix level 3) Try varying degree's of effects *** 11/19 + The recd/play fade should be able to trigger from a capture note as well as playback note. An offset might also be useful. (Should be a default fade for each fragment - keyed to the input. This will be the fade that will occur when + Allow setting fade time in the score. + Allow setting fade rate based on 1.0 to 0.0 from fade point to end point. + Allow for multiple fades markers per fragment. (what does this mean?) + Write code to ignore playback when the score follower is not stable - or to throw out fragments where there is a mistake. + At the end of each fragment recording the fragment should be truncated by the look-ahead time to avoid capturing the attack of the marked note. + FX on fragments. + MUST be able to record synchronized audio and MIDI during test performance. + Part 2 data analysis: analyze the order of notes in counter rhythms. *** 11/1 + Change the wavetable to read stereo files or add a second wavetable to play the other channel. + The console window is not always updating from the bottom. + The 'Dump' button results are not going to the console window. + Put dry signal into separate output channels. + Add 'adaptive' mode parameters to scale/range mappings. + The 'meas'->'parameter' mappings should changable from scMod (mod0.js) + The 'adaptive' mode parameters (e.g. offset and invert) need to be connected in the patch. + Create a mode in scMod which increments values based on an onset detector. So that changes only happen on attacks. This still doesn't help if the pedal is down (or if notes are sustained) but otherwise might be a better way to ramp parameters. + Mark all notes in the score according to how well they would act as places to transition. Notes held while the pedal is down would not be good places to transition. These indicators would then be used to determine where a section change can occur when the actual section change is missed. + (done) All score_loc's and event indexes in meas0.js that beginning with score location 743 must be decremented by two. (e.g. loc 743 becomes 741 ...) (score_loc_1.txt is now the correct score file) + When scanning past ramping variables in scMod the end value should be taken as the next variable(???) - this is not necessarily correct because one never knows where a timed change may end - maybe ramped variables should include a 'skip value' giving the next ambient value for the ramped variable - experiment with this to figure out what works. *** 10/17 Select bar 129. Start on F5 before 129. Score follower jumps to loc. 978 then backs up to 973. *** 9/27 * (DONE) Implement live recording for use in part 2. * Implement a delay between when a new section is set to trigger and when it actually does. This might allow transitions to be set up prior to when they are heard. * (DONE) OS-X version crashes when the printf("PROCSET ...) is removed from _cmScProcSets(). * Add ability to set mappings and perf. measure settings to scMod. * The scMod should play through all changes up to the cur starting location so that we can mimic the state of playing the piece through but allow starting from any location. * Experiment with changing settings using the scMod ramping functions. * Make a source separation based fade using an filter/inverse filter based on the spectrum prior to the cross-fade. As an extra feature notice the state of the pedal and decay appropriately. * The electronic score needs the ability to specify that the output is sent to the audible cross-fade channel rather than the inactive channel. * Add a score mode that performs some action (e.g. incr/decr) on each incoming score follower event. * In AvailCh what happens when no available channels are found - this may be the cause of the cross-fade cut-out problem. * Add eq stage to output. * Setting the upper slope to a negative value is effective. * Demo Material: Seq 8 Mark 204 (1024-4 2048-4) Fade 10ms Cost->Threshold. - recd7 Mark 151 - recd8 Mark 145 - same settings a previous take. - (recd9) Mark 145 - w/ changing xfade switch to mode 4 at 38 - recd10 Mark 145 - same w/ no mode change - recd11 Mark 145 - a. 3 different takes w/ score constant - no perf. parameters used - fixed threshold=65 - recd12 Mark 148 b.(same settings as recd9) - recd13 Mark 151 c. - recd14 Mark 161 Section 40 - fixed changes see mod0.js for note - Seq 6 Mark 145 M-92 (38,39,39a) (recd16) (recd17) (recd18) (recd19) - Seq 7 Mark 167 M-100 *** 8/13 * Cross-fade was cutting out during demo. * Missing takes between seq 7 and seq 8. * The MIDI is mis-aligned against the audio. * Are cost / tempo working? ... test changing mode. * Add an automatic volume adjustment to prevent parameter changes from causing large volume changes. * What can we actually do between after a MIDI note is received? Is it already too late to send parameters w/o affecting the attack of the note. * Live Test material Part 1: Meas:76 - (one measure) to get measurments for later sections Part 1: Meas:94 (sect 38 (Seq 6)) through Meas:136 (include 136 stop at 137). Part 2: ("/Users/kevin/temp/piano score part 2 draft 1 master m 232 - 241 1st 2 bts.sib") The downbeat of part two aligns with the 3rd beat (in 4/4) of 122 in the first part. Ends on measure 131 at end of beat 3. MISSING MIDI for measures 114:126 *** July 10 ** (done) Make separate mappings and scale/range controls for left and right. ** Add EQ output stage. ** Work out the speaker setup. ** Add capture/playback. Analyze notes on capture and do not play if there are any wrong notes. (Skipped notes however are acceptable.) ** ** When a section transition is occurs late - (e.g. due to dropped notes) do not apply the transformation all at once - instead either ramp it in or step it in on subsequent attacks. Section transitions which are positively identified are intended to have dramatic changes so applying the updated parameters immediately is acceptable - but when the parameters are changed mid-section they should be much applied subtely. ** (done) Build a database of measurements and setup the program to be able to apply a given measurement at it's assigned section. ** Redevelop spectral distortion algorithm to use a spline as the transform. ** use Log frequency frequency transform instead of FFT. ** Allow for a continous window size via zero padding. ** Add a 'write' preset file button - so the preset file can be saved prior to next crash. ** measurement values can generate MAX_DBL - be sure that are not being sent through to the audio algorithm. (see ln:965 cmDspKr.c for a hack to fix this) ** add invert to scale/range to cause output to go in opposite direction. ** non-grace eveneess are used to generate a measurement value from previous tempo calibration section. (non-grace evenness notes therefore have two scores: 'evenness' and 'overall-duration'). ** note that the default setting for dyn and even. ** add dyn,even,tempo,cost number boxes to allow artificial setting of these parameters. add dyn,even,tempo,cost as modulator variables to allow them to be set from the modulator With these additions we can simulate apply measurements at the 'application' section. ** add begining and ending measure numbers to 'seq' labels ** Gain compensation for mode 4. ** Do IFFT using cos()^c + i * sin()^c - these bases are orthognal but cause harmonic distortion. To be efficient this might involve writing an FFT function. // May 22 ** Crashers (Should be tested but are probably already fixed following score follower debugging.) Seq 2 m24 Mark 36 & 38 Seq 4: Mark 115 Seq 4: m76-79 Mark 129 (W/ meas: even & dyn -> thresh change min Thresh to 40) - use 4th seq w/ b1 Seq 6: m92 Mark 143 Seq 7: m103 Mark 173 Seq 7: Mark 172 Meas 103 - always crashes on playback. Seq 4: Mark 76 Meas 40 - crash! Seq 2: First mark meas 23 Crash seems to happen in cmProc4.c: _cmScMatchInitMtx() ln:1311. It looks like a memory overrun. Looks like the first line is wrong shouldn't: if( rn >p->mrn && cn > p->mcn ) be if(rn*cn > p->mrn*p->mcn) BUGS: // Apr 20 The tempo measurement can produce invalid values. Set score to 22 then play Mark 38. First tempo measurement is a non-sense value - probably produced by an div by zero. Also: Mark 8, Meas 10. Crash on playing Mark 37. Click on list control outside below list item - crash! Select Mark 171 (Seq 7) Section 43, m103 crash // Feb 27 + Audio seems to preceded MIDI by around 250ms this probably arises from a delay that was inserted by 'mas'. Can the delay be removed? // Feb 25 + Fix the audio file input/output ports // // Feb 6 & 7 // + Performed notes which arrive which about 50ms could be considered chords. Extra notes notes which were not part of the chord are probably common and should be discounted during the cost analysis. + (done) Add alignment cost as a 4th variable along with dyn,even,tempo. + (done) In the score print out (score_loc.txt) Section 2 is starting on Bar 5 when it should start inside Bar 7. + In Take 1 the 2nd dynamics set is not triggered. + In Take 3 Eveness 2 the C2 and F#4 are NOT missing althrough they are in the evalation. Also E7 which ends that set is not marked with an 'e'. + It is possible to have even-non-grace sets where the note rythm value's are not all the same (e.g. bar 20 ) + User soft-thresholds for the dynamics categories. + Set 39 even measure 25 shows the first note as G#2 when it should be C#1 + Missig MIDI note sounded: C1 score-loc:132 A#2 140 A5 173 C#2 195 Marker 36 E5,G33,A#2,C#1 212-218 Marker 36 E3 185 Marker 37 F5,C#4,G#5 986 Marker 204 ------------------------------------------------------------------------------- OSX - Install Notes ------------------------------------------------------------------------------- 1. Install macports 2. Install git-core (sudo port install git-core) 3. sudo port install fftw-3 4. sudo port install fftw-3--single 5. port select --list gcc (which gcc is active) 6. sudo port install gcc47 7. sudo port --set gcc mp-gcc47 8. sudo port install fltk 9. sudo port install xorg-libX11 10.sudo port install git-core 11.sudo port install emacs +x11 10 install ~/Library/Preferences/org.larke.kc.txt (is this required?) 11 create ~/Library/Preferences/kc 12 Install ~/Library/Preferences/time_line.js, time_line_preset.js, time_line_preset.csv