From a17bddb959ea0f07a6d2f6009d78b879f24ef491 Mon Sep 17 00:00:00 2001
From: Kevin Larke <kevin@larke.org>
Date: Mon, 20 Oct 2014 10:11:43 -0700
Subject: [PATCH] doc/notes.txt : Updates from 10/18-19 Session

---
 doc/notes.txt | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/doc/notes.txt b/doc/notes.txt
index c825251..dd30250 100644
--- a/doc/notes.txt
+++ b/doc/notes.txt
@@ -12,6 +12,61 @@ SPAT LAB SETUP:
     a. TotalMix - select 'DTS_24ch'
     b. mixer: Recall preset 96 ('24ch firecac ufx')
 
+
+=============================================================================
+CHANGES TO SIMULATE MODE TO ALLOW MIDI FILE PLAYER TO DRIVE SCORE
+FOLLOWER DIRECTLY RATHER THAN FEEDING SCORE FOLLOWER FROM MIDI INPUT PORT:
+
+CHANGE:
+  LINE 1150 cmDspSysInstallCb(h, siRt, "f-out-1", sfp,  "smpidx",NULL );
+       1154 cmDspSysInstallCb(h, d0Rt, "f-out-1", sfp,  "d0",    NULL );
+       1160 cmDspSysInstallCb(h, d1Rt, "f-out-1", sfp,  "d1",    NULL );
+       1166 cmDspSysInstallCb(h, stRt, "f-out-1", sfp,  "status",NULL );
+
+BACK TO:
+  cmDspSysInstallCb(h, siRt, "f-out-0", sfp,  "smpidx",NULL );
+  cmDspSysInstallCb(h, d0Rt, "f-out-0", sfp,  "d0",    NULL );
+  cmDspSysInstallCb(h, d1Rt, "f-out-0", sfp,  "d1",    NULL );
+  cmDspSysInstallCb(h, stRt, "f-out-0", sfp,  "status",NULL );
+
+
+=============================================================================
+
+
+
+Session Notes: 10/18/14
+1) Contact and air mics ogain all set to 1.0
+   Sometimes igain on air mics reduced to control feedback.
+   Speakers are 10 ft in front of piano
+
+   AudioBox Gains all at 10 oclock.
+   FMR Preamp 2nd notch on air mics
+   Mixer 2.5 kHz 10 oclock, 80 Hz 9 oclock.
+   Mixer in gains 11 oclock w/ 75 Hz low cut engaged
+
+2) Need input Eq for contact mic's. LP,BP,HP with adjustable xover Fc and Gain.
+
+3) Preset G works best. With 'offset' used to control radicalization between 20 and 80.
+
+4) Add a control cmSpecDist() to interpolate between the input and output
+   spectrum.  This would allow a smooth transition between transformed
+   and untransformed signal.
+
+   The interpolation can be made to be frequency dependent.  This could
+   also be used to counter the bass boost which the transform tends
+   to produce.
+
+5) Add 'offset' as a modulator variable.
+6) Are the dynamic modulator parameter controls working: line, sline
+7) Many of the modulator file labels are redundant - can they be left out?   
+   (When modulator file values are missing they  should default to their last set value).
+
+8) When the score follower triggers a change the change seems to come
+   before the Disklavier note sounds due to Disklavier system latency.
+   Add a delay to the input of scMod to compensate for this delay.
+
+9) The scMod data file would be easier to work with if it was in columnar form.
+
 Session Notes: 9/28/14
 1) Problems with feedback were mitigated by brining down the input gain.
    In generate the input/output gain were set to: