gen_mod.py : begin setting xform extents

src/kc/data/gen_mod/gen_mod.py

 
    {                 var:upr0,           val:0 },
    {                 var:upr1,           val:0 },
-   {                 var:lwr0,           val:2.0 },
+   {                 var:lwr0,           val:2.0 },  // lwr has a hardcoded min. of 0.3
    {                 var:lwr1,           val:2.0 },
    
    {                 var:off0,           val:20 },
         ]
 
     seq1L =[
-        (301, None) # meas 33
+        (1, None)   # meas 1
+        #(301, None) # meas 33
         #(480, None) # meas 41
         ]
     
 
     # make all presets identical to preset 'a'.
-    presetL = dupl_preset( dfltPresetL, "f_4", dfltLabelsL)
+    presetL = dupl_preset( dfltPresetL, "g_1_d", dfltLabelsL)
 
     # assign a sequential range of thresholds to each preset
-    mod_range( presetL, "thr", 50.0, 90.0, 55.0, 95.0 )
-    mod_range( presetL, "cigain", 6.0, 12.0, 6.0, 12.0 )
-    mod_range( presetL, "upr",  2.5, -5.0, 2.3, -5.2)
-    mod_range( presetL, "lwr",  0.5,  2.0, 0.5,  2.0)
-
-    #mod_range( presetL, "thr", 50.0, 90.0, 55.0, 95.0 )
-    #mod_range( presetL, "cigain", 6.0, 12.0, 6.0, 12.0 )
-    #mod_range( presetL, "upr",  2.5, -8.0, 2.3, -8.2)
-    #mod_range( presetL, "lwr",  0.5,  3.0, 0.5,  3.0)
+    if 0: # 12/28/16
+        mod_range( presetL, "thr", 50.0, 90.0, 55.0, 95.0 )
+        mod_range( presetL, "cigain", 6.0, 12.0, 6.0, 12.0 )
+        mod_range( presetL, "upr",  2.5, -5.0, 2.3, -5.2)
+        mod_range( presetL, "lwr",  0.5,  2.0, 0.5,  2.0)
+
     
+    #mod_range( presetL, "thr", 30.0, 90.0, 35.0, 95.0 )
+    #mod_range( presetL, "cigain", 10.0, 16.0, 10.0, 16.0 )
+    mod_range( presetL, "thr", 65.0, 65.0, 65.0, 65.0 )
+    #mod_range( presetL, "upr", -0.05, 4.5, -0.05, 4.5)  # upr slope min: -0.05
+    mod_range( presetL, "upr", -0.05, -0.05, -0.05, -0.05) 
+    #mod_range( presetL, "lwr", 1.1, 8.0, 1.1, 8.0 )     # 1.5 is good
+    #mod_range( presetL, "lwr", 8.0, 8.0, 8.0, 8.0 )
+    mod_range( presetL, "lwr", 1.5, 1.5, 1.5, 1.5 )
+    mod_range( presetL, "off", 0.0, 99.9, 0.0, 99.9)
+    #mod_range( presetL, "upr",  2.5, -5.0, 2.3, -5.2)
+    #mod_range( presetL, "lwr",  0.5,  2.0, 0.5,  2.0)
+
+
+    # thr    upr  lwr   offs
+    # 65   -0.05  1.5   0.0
+    #                  99.9
+    # 65   -0.05 10.0   0.0
+    #                  99.0
 
     with open(fn,"wt") as f:
         f.write("{\n")