cwtest Testing and Development Application for libcw.

cwtest is a command line interface to libcw.

Command line:

cwtest <file.cfg> <label>

Where <file.cfg> refers to a libcw configuration file file with the form:

{
  test: {
  
    `program_0`: {
      a:1
      b:"hello"
    },
    
    `program_1`: {
      arg0:["abc","def"]
      b:{ a:73, z:[19] }
    }
}

<label> refers to a specific set of named parameters (e.g. program_0,program_1) which are associated with a library function. See main.cpp mode_array[] for the mapping of labels to functions.

The goal of cwtest is to be able to easily exercise libcw functions, or build simple utilities based on them, with a flexible sets of parameters. The primary parameter file is src/cwtest/cfg/main.cfg.

---

MIDI - MIDI Device Manager

---

midiDeviceReport cwMidiDeviceTest.cpp testReport()

---

List The current set of MIDI hardware devices

CLI Label	Source File	Function
midiDevice	cwMidiDeviceTest.cpp	test()

Interactive testing of the MIDI input file device start/pause/unpause/stop functions. This function also validates the latency of the device by comparing the time between MIDI events as generated by the device to the actual time between the events in the MIDI file.

CLI Label	Source File	Function
midifile	cwMidiFile.cpp	test()

MIDI file utility parameters:

Convert a MIDI file to a CSV file.

csv: { midiFn:<filename> csvFn:<filename> }

Print the first MIDI messages from a file.

rpt_beg_end: { midi_fname:<filenae>, msgCnt:<int>, note_on_only_fl:<true|false> }

Print the entire contents of the MIDI file.

rpt : { midiFn:<filename> }

Convert all the MIDI files in the folder: <path>/<folder>/take/'record_%i' to CSV files

batch_convert: { io_dir:<path>, session_dir:<folder>, take_begin:<int>, take_end:<int> print_warnings_flag:<true|false> }

Serial - Serial Port Manager

CLI Label	Source File	Function
serialSrv	cwSerialPortSrv.cpp	sesrialPortSrvTest()

This is an interactive test of the serial port send/receive functions. The function continuously transmits ASCII values '0' through 'z' to external devices /dev/ttyACM0 and /dev/ttyACM1. Those devices should increment the received value and send it back, where it is receieved and printed to the console. Firmware to run on ATMEGA328 based devices, like the Arduino Uno, is provided in study/serial/arduino_xmt_recv/main.c.

wesockSrv - Web Sockets Server

CLI Label	Source File	Function
websockSrv	cwWebSockSvr.cpp	websockSrvTest()

Interactive websocket server testing application. Run the app and navigate in a web browser to localhost:5687 to run the application.

nbmpscQueue - Non-Blocking Multiple Producer Single Consumer Queue

CLI Label	Source File	Function
nbmpscQueue	nbmpscQueue.cpp	test()

Run the non-blocking, multiple producer, single consumer queue for 'testDurMs' millisecdons and write the result into 'out_fname'. This is the queue used by the websocket implementation (See cwWebSock.h/cpp) to support incoming calls form multiple threads without blocking the calling threads.

Audio

CLI Label	Source File	Function
audioDevAlsa	cwAudioDeviceAlsa.cpp	report()

Generate a list of devices and device attributes directly from the ALSA sub-system.

CLI Label	Source File	Function
audioDevRpt	cwAudioDevice.cpp	report()

Generate a list of devices and device attributes from libcw. This will include audio file based devices.

CLI Label	Source File	Function
audiofile	cwAudioFile.cpp	test()

Print the audio file format.

Operations on Audio Files

CLI Label	Source File	Function
afop	cwAudioFile.cpp	test()

sine - generate a sine signal mix - mix multiple audio files with selectable gains per file. select_to_file - save sections of audio files to new audio files cutAndMix parallelMix transformApp convolve generate

Socket

CLI Label	Source File	Function
socketMgrSrvTest	cwSocket.cpp	mainTest()
socketMgrClientTest	cwSocket.cpp	mainTest()

Interactive socket based client/server application. Start socketMgrSrvTest in one process, then socketMgrClientTest in a second processor.

CLI Label	Source File	Function
dirEntry	cwFileSys.cpp	dirEntryTest()

Exercise the directory reader.

IO Interface

CLI Label	Source File	Function
io_minimal	cwIoMinTest.cpp	min_test()

cwIoMinTest.cpp gives minimal template for an interactive application based on cwIo.h/cpp.

CLI Label	Source File	Function
io	cwIoTest.cpp	test()

Run Unit Tests:

These test are run by the libcw testing framework in cwTest.h/cpp. The configuraton for the unit tests is in src/cwtest/src/cfg/test/main.cfg.

1. Add a new test:

   • Create a function like this: rc_t my_test_func(const test_args_t& args);

   • Add the module name, function pair to the _test_map[] in cwTest.cpp.

   • Add an entry to the test parameters cfg. below.

     • Name the test case (e.g. test_0) and give the test parameters.
     • On the call to my_test_func() the args.module_args is set to the 'module_args' dictionary defined in the cfg.
     • Likewise args.test_args is set to the 'test_args' dictionary referenced by the test name label 'e.g. test_0:{ my_arg:1 }'.

   • Run the test like this: cwtest test/main.cfg test /my_module test_0 echo to see the results of the test run. The results of this run will be written into /cur/my_test/test_0/log.txt

   • Once the results have been validated copy the output from 'cur' to the /ref/my_test/test_0/log.txt.

   • Verify that the test passes: cwtest test/main.cfg test /my_module test_0 compare

2. The test spec. is recursive. Modules can be listed inside of modules. (e.g. 'lex' and 'flow').

3. If a module spec. does not have an embedded 'module' or 'module_args' then the cases may be listed without a 'cases' label. (e.g. 'filesys','object', 'vop')

4. Command line args:

   Parameter	Description
   <module_path>	'all' (required) The module path always begins with a '/'.
   <test_label>	'all' (required)
   'gen_report'	Print modulue/test label.
   'compare'	Run compare pass.
   'echo'	Print the generated test output to the console.
   'args'	All command line args after 'args' are passed to the tests.

5. Example command lines:

      cwtest ~/src/cwtest/src/cwtest/cfg/test/main.cfg test /lex test_0 gen
      cwtest ~/src/cwtest/src/cwtest/cfg/test/main.cfg test /flow test_0 compare

GDB Setup:

set env LD_LIBRARY_PATH /home/kevin/src/libcm/build/linux/debug/lib
r ~/src/cwtest/src/cwtest/cfg/main.cfg mtx

// if problems occur with gdb hanging while download debuginfo 
sudo dnf upgrade --enablerepo=*-debuginfo "*-debuginfo"   # update all debuginfo files

r ~/src/cwtest/src/cwtest/cfg/video/video.cfg preset_sel  record_fn m302-325 beg_play_loc 9187 end_play_loc 10109
r ~/src/cwtest/src/cwtest/cfg/video/video.cfg preset_sel  record_fn m350-458 beg_play_loc 12431 end_play_loc 14726
r ~/src/cwtest/src/cwtest/cfg/video/video.cfg preset_sel  record_fn m1_283 beg_play_loc 0 end_play_loc 8452

r ~/src/cwtest/src/cwtest/cfg/gutim_full/gutim.cfg preset_sel  record_fn m1_458 beg_play_loc 327 end_play_loc 396

Valgrind setup

export LD_LIBRARY_PATH=~/src/libcm/build/linux/debug/lib
valgrind --leak-check=yes --log-file=vg0.txt ./cwtest  ~/src/cwtest/src/cwtest/cfg/main.cfg mtx

Installation

Dependencies:

• libwebsockets-devel
• fftw-devel
• libcm: lapack-devel

•   atlas-devel
  

#Design Questions:

How should errors be presented to the user? developer?

#To Do:

All callbacks should return meaningful result codes.

UI Properties

name            - becomes the HTML id for this element
appId             application id for this element
title             label or title for this element
className         Base class name for this element. All elements have a built-in default class name.
addClassName      Add this class name to the class name.
clickable         This elemnt will send a 'click' msg when clicked.
enable            This element is enabled
visible           This element is visible.

Preset Select

• If the the parsing of the main cfg file fails the app crashes in main.cpp with a double free.
• play on preset letter select
• allow the network to be reloaded without restarting the program
• create an interactive spec-dist panel to experiment with presets

REVIEW:

• gain problem

• was it really the transition bug and not a gain bug?
• FFT normalization
• Float/Int conversion on ALSA output
• create a metering object to examine signal at various places in network
• add compressor/limiter like in cm based network

DONE:

• save preset check box state.

• verify that all fragments are saved and restored

• UI: remove 'Filename' entry box.

• flow proc: gain, audio channel split map, audio channel merge map, fixed delay

• Fix CPU usage: work around for serial port server.

• App: apply wet/dry and gain when new presets are loaded.

• App: add 'Note' to fragment

• App: add per fragment play control with begin/end locations

• UI: reorganinze top panel layout

• App: Add a status box to report errors and warnings to the user.

• App: Send log output to "Log" UI.

• App: When a invalid value is entered (thereby disabling a control) a message should be written to the status box.

• App: Add ranges to numeric controls.

• App: What happens when an invalid value is entered in a GUI control?

• App: interactive wet in gain, wet out gain, dry gain, piano midi enable, sampler midi enable, sampler delay

• App: interactive print network

• App: automatically load on start

• flow: Allow setting a specific variable value from a network preset

• preset_sel: The sampler requires a different velocity map than the piano. The piano was scaled down but now the sampler is too quiet.

• preset_set: deleting a fragment does not automatically fill in the missing location space.

• preset_sel: backup to numbered file on save

• preset_sel: Velocity of the individual notes of chords should be scaled to such that their sum matches the dynamic value.

• libcw: Make IO sub-systems optionally synchronous

• UI: clear UI when the app disconnects.

• UI: Add an error indicator and API for each control (e.g. border set to red)

• UI: Add the ability to order child lists via the 'order' attribute.

• UI: Add API to delete a UI element

• UI: add HTML class and name assignments to row/col div's. (See 'name' and 'addClassName' attribute.)

• UI: add min/max/incr/decpl attributes to numeric variables (See uiSetNumbRange.)

• PresetSel: Select and highlight a fragment.

• PresetSel: + test adding,deleting, saving and restoring fragment records

• Enable 'Delete' button when a fragment is selected.